Tony,
 
I Managed to get the partition to see the ADIC  , the issue was that I had no 
SCSI devices and this stopped the /dev/lus device being created. I attached a 
SCSI card and CDROM to my LPAR and i can now run inquire and jbconfig on the 
ADIC. My issue was that all of my devices were Fibre attached and i had no SCSI 
at all.
 
Ian.

________________________________

From: Legato NetWorker discussion on behalf of Barber, Tony
Sent: Mon 10/31/2005 17:14
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] AIX and NSR and Libraries



We have been trying to get our AIX Version 5.3 server to see the ADIC
scalar i2k Jukebox for the past few weeks.
At first we could not get even the Legato inquire command to see
anything.
After updating AIX to the latest updates the inquire command sees the
two LTO-3 Tape Drives.
It still does not see the ADIC i2k Autochanger.  Even tried the Legato
command: changers -dvl
It only sees the two LTO-3 Tape Drives.  Both AIX and Legato have been
working on the problem.
Any suggestions???
-----------------------
TONY BARBER
UNIX SYSTEMS ADMINISTRATOR
775-886-3989  (Direct)  775-720-9475  (Cell)
tony.barber AT hdfsi DOT com

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of Sackson [US], Mark A.
Sent: Monday, October 31, 2005 2:00 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] AIX and NSR and Libraries

We are running the ADIC scalar i2k with NSR 7.2.172 on AIX 5.1.
It took a while to get everything to talk properly,
but once it did, we not had any major problems.
Mark

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU]
On Behalf Of McLeavey, Ian
Sent: Sunday, October 30, 2005 10:23 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: [Networker] AIX and NSR and Libraries

I am looking to connect an ADIC scalar i2k to NSR 7.1.3 on AIX 5.3 with
LTO-2 drives
What experience do people have on device drivers and software to control
the autoloader ??

Thanks
Ian Mcleavey
To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and
type "signoff networker" in the body of the email. Please write to
networker-request AT listserv.temple DOT edu if you have any problems wit this
list. You can access the archives at
http://listserv.temple.edu/archives/networker.html or via RSS at
http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER

To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER



To sign off this list, send email to listserv AT listserv.temple DOT edu and 
type "signoff networker" in the
body of the email. Please write to networker-request AT listserv.temple DOT edu 
if you have any problems
wit this list. You can access the archives at 
http://listserv.temple.edu/archives/networker.html or
via RSS at http://listserv.temple.edu/cgi-bin/wa?RSS&L=NETWORKER