Hi,
please, verify your setting of tape device configure
However, I am not sure where True64 has stored this information. This
information is from Legato Error Messages. What the important.
Default, networker uses 64kB block size, the tape drive hasn´t strict set
of block size /the block size is managed by OS or software/.
Therefore, check this setting on your system....
DLT8k -data = 1, 0x36, 0, 0x8219, 4, 0x82, 0x83, 0x84,
0x85, 3;
By changing the block size, this entry becomes:
DLT8k-data - 1, 0x36, 64, 0x8219, 4, 0x82, 0x83, 0x84,
0x85, 3;
Messages: V
• If the volume was created using an existing configuration, set the block
size in the st.conf file equal to the SCSI controller’s block size limit.
To
determine the block size limit, use the mt command. For example, if the
SCSI block size limit is 64k, change the block size entry in the st.conf
file to
64.
Petr Hanzlík
snoop <ksdsya AT RHEA-INFO DOT COM>
Odeslal: Legato NetWorker discussion <NETWORKER AT LISTSERV.TEMPLE DOT EDU>
28.06.2005 03:42
Odpovězte prosím uživateli Legato NetWorker discussion; Odpovězte prosím
uživateli snoop
Komu: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Kopie:
Předmět: critical problem .. help me
Server : compaq5.1 (tru64 cluster Oracle Server)
Networker 6.1 (build 186) network/10
Tape Library : compaq (DLT8000) 2drives
device name : /dev/ntape/tape6_d1
/dev/ntpae/tape7_d1
I back up Oracle Cluster datafile. Datafile size is 300Gbytes
Oracle script is used for oracle backup in savepnpc.
the script is easy coding by ksh shell
ora-begin.sh
------------
#!/usr/bin/ksh
svrmgrl << EOF
connect internal
alter database system begin backup ;
alter database user1 begin bakcup;
...
...
...
<< EOF
ora-end.sh
-----------
#!/usr/bin/ksh
svrmgrl << EOF
connect internal
alter database system end backup ;
alter database user1 end bakcup;
...
...
...
<< EOF
Oracle backup group is Oracle
this group's savepnpc is in /nsr/res/Oracle.res
this file consist next syntax
precmd: "/nsr/script/ora-begin.sh"
pstcmd: "/nsr/script/ora-end.sh"
timeout "12:00:00"
Oracle backup started from auto schedule.
Oracle Backup progressed normally.
But before backup is end pstcmd is running and ora-begin shell is started
this happen in 06:00, backup'end time is 08:00
Why pstcmd is running before backup is end ?
backup result in sucess but this data can't recover . because
ora-end.sh is runned before backup is end.
help me ...
and i show messages in /nsr/logs/daemons.log, messages
Block size is 32768 bytes not 98304bytes, verify the device configuration
tape positioning by record is disabled
what's mean ?
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|