We have several installations with NetWorker 7.1.1 on Windows doing backup
over 2Gb FC to a EMC DL300 Disklibrary. We achive 200MB/sec - 220MB/sec if
the disks of the server are accessed over one FC adapter and the DL300
over another FC Adapter. We started with a blocksize of 96KB for the
virtual tapes and achived 10-30MB/sec. After we changed the blocksize to
512KB(the limit of the emulex FC Adapter) we achive the 200-220MB/sec. The
compression on the DL300 is enabled and we get a load of 50-60% on the
DL300.

greetings f_x

> We currently run Legato Networker 7.1.3 on Windows, i was wondering what
> writing speed other people get when writing to disk as our full backup
> runs for 36 hours and writes 1.7 terabytes which is a writing speed
> average of 13.75 Mb per seceond which i thought is rather slow, i thought
> to disk i should get over 20Mb easy. Could people reply with there
> comments and speeds.
>
> Regards
>
>
> Andrew Bridgeman
>
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listserv.temple DOT edu or visit the list's Web site at
> http://listserv.temple.edu/archives/networker.html where you can
> also view and post messages to the list. Questions regarding this list
> should be sent to stan AT temple DOT edu
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
>
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=