>Make sure that the storage nodes are listed in the storage nodes field
>on the networker server.  Then you can restrict the pool that you are
>staging to to devices on the storage nodes.

Not only : You must have all SN is server clone storage node affinity list,
having SN name listed in each SN's Clone storage node affinity.
and schedule nsrstage from each SN, not from the server.

I think it should work.

HTH,
Thierry

> Thanks Lee,
>
> Legato have had this call for a few days now :)
>
> Kevin
>
> -----Original Message-----
> From: Lee Hanel [mailto:lhanel AT rackspace DOT com]
> Sent: 08 April 2005 15:25
> To: Allan, Kevin; Legato NetWorker discussion
> Subject: Re: [Networker] Problem with staging to storage node
>
> Make sure that the storage nodes are listed in the storage nodes field
> on the networker server.  Then you can restrict the pool that you are
> staging to to devices on the storage nodes.
>
>
> Lee
>
>
> On Fri, 2005-04-08 at 06:28 -0700, Allan, Kevin wrote:
>> I am currently in the process of setting up our first adv_file type
> devices
>> and staging policies but have hit a problem,
>>
>>
>>
>> We have one networker server and two storage nodes, each with local tape
> and
>> adv_file devices.
>>
>>
>>
>> I had hoped to configure the system so that all staging would be
>> localised
>> to the server in question, thus removing any network traffic during the
>> staging process.
>>
>>
>>
>> I.E.
>>
>> Staging on the networker server would only use the local adv_file device
> and
>> stage to a local LTO drive.
>>
>> Staging on the storage node would only use the local adv_file device and
>> stage to a local LTO drive.
>>
>>
>>
>> Unfortunately I cannot seem to get this working, all staging at the
>> moment
>> has to stage to a LTO device attached to the networker server.
>>
>> If I do not include a device from the networker server in the stage
>> policy
>> destination pool, I end up with the following error:
>>
>>
>>
>> 04/08/05 12:06:16 nsrd: media notice: no matching devices; check storage
>> nodes, devices or pools for save of client `networker server'
>>
>> nsrstage: error, no matching devices; check storage nodes, devices or
> pools
>>
>> nsrstage: Cannot open nsrstage session with kirkbkp01
>>
>> nsrstage: Failed to clone any save sets
>>
>>
>>
>> I would appreciate any pointers.
>>
>>
>>
>> Regards,
>>
>> Kevin
>>
>>
>>
>>
>>
>>
>> --
>> Note: To sign off this list, send a "signoff networker" command via
>> email
>> to listserv AT listserv.temple DOT edu or visit the list's Web site at
>> http://listserv.temple.edu/archives/networker.html where you can
>> also view and post messages to the list. Questions regarding this list
>> should be sent to stan AT temple DOT edu
>> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listserv.temple DOT edu or visit the list's Web site at
> http://listserv.temple.edu/archives/networker.html where you can
> also view and post messages to the list. Questions regarding this list
> should be sent to stan AT temple DOT edu
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=