Make sure that the storage nodes are listed in the storage nodes field
on the networker server.  Then you can restrict the pool that you are
staging to to devices on the storage nodes.


Lee


On Fri, 2005-04-08 at 06:28 -0700, Allan, Kevin wrote:
> I am currently in the process of setting up our first adv_file type devices
> and staging policies but have hit a problem,
> 
>  
> 
> We have one networker server and two storage nodes, each with local tape and
> adv_file devices.
> 
>  
> 
> I had hoped to configure the system so that all staging would be localised
> to the server in question, thus removing any network traffic during the
> staging process.
> 
>  
> 
> I.E.
> 
> Staging on the networker server would only use the local adv_file device and
> stage to a local LTO drive.
> 
> Staging on the storage node would only use the local adv_file device and
> stage to a local LTO drive.
> 
>  
> 
> Unfortunately I cannot seem to get this working, all staging at the moment
> has to stage to a LTO device attached to the networker server.
> 
> If I do not include a device from the networker server in the stage policy
> destination pool, I end up with the following error:
> 
>  
> 
> 04/08/05 12:06:16 nsrd: media notice: no matching devices; check storage
> nodes, devices or pools for save of client `networker server'
> 
> nsrstage: error, no matching devices; check storage nodes, devices or pools
> 
> nsrstage: Cannot open nsrstage session with kirkbkp01
> 
> nsrstage: Failed to clone any save sets
> 
>  
> 
> I would appreciate any pointers.
> 
>  
> 
> Regards,
> 
> Kevin
> 
>  
> 
> 
> 
> 
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listserv.temple DOT edu or visit the list's Web site at
> http://listserv.temple.edu/archives/networker.html where you can
> also view and post messages to the list. Questions regarding this list
> should be sent to stan AT temple DOT edu
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=