Re: [Networker] Drive unable to unload
2005-02-07 10:40:48
Somen Chanda wrote:
Hi,
We moved from Sun to Linux and facing a lot of problems. This is one of
them. We get this error very frequently.
media info: failed unloading drive `rd=backup1:/dev/nst1' to slot '12',
error '25'
Then the drives will be disabled by legato unless we notice and run mt
command to unload the tape manually. I use
# mt -f /dev/nst0 unlock
# mt -f /dev/nst0 rewind
# mt -f /dev/nst0 offline
# mt -f /dev/nst0 eject
We have a ADIC Scalar100 with IBM Ultrium 3580 drives in them. Our backups
are failing because of these errors and the tapes are bound to get stuck in
the drives every night.
Can anyone help?
Thanks in advance.
Somen Chanda
Somen,
I, too have had similar problems which I've written about aq nyumber
of times.
If you look at the most recent Linux release notes (I think it wasi n
the release notes),
you'll see that they have a further recommendation for the stinit.def
file. They suggest that
you add a line that looks like the following:
"auto-lock=0"
Actually in the release notes, they have it as
"auto_lock" (with an underscore) which is incorrect.
We have AIT drives, and I wonder if this might not be relevant to your
setup.
Over the last 4 years here, I've had many, many problems with drive
settings
(variable block size) reverting to fixed, tapes not unloading, etc.
I've also found that many of the /usr/sbin/cdi* utilities have been
useful for
workarounds, especially /usr/sbin/cdi_load_unload. But believe it or
not, one of our
problems is only fixed by forcing a tape into a drive by front-panel
commands on the library,
then running "scanner -v" on the tape. Many weirdly-spent hours of
experimenting led to
this discovery!
Matt Temple
--
=============================================================
Matthew Temple Tel: 617/632-2597
Director, Research Computing Fax: 617/582-7820
Dana-Farber Cancer Institute mht AT research.dfci.harvard DOT edu
44 Binney Street, LG300/300 http://research.dfci.harvard.edu
Boston, MA 02115 Choice is the Choice!
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|