Networker

Re: [Networker] Installing Legato on VMS

2005-01-24 15:43:58
Subject: Re: [Networker] Installing Legato on VMS
From: Terry Lemons <lemons_terry AT EMC DOT COM>
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Date: Mon, 24 Jan 2005 15:43:15 -0500
Just remembered.  You can do a 'mount/system' if you want to make it
available to ALL users of the system, not just the current process.

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTSERV.TEMPLE DOT EDU] 
On
Behalf Of Werth, Dave
Sent: Monday, January 24, 2005 3:00 PM
To: NETWORKER AT LISTSERV.TEMPLE DOT EDU
Subject: Re: [Networker] Installing Legato on VMS

Yes, that is correct.  In my rustiness I missed that he wasn't in the
[000000] directory.  Thanks for the clarification.

 

Dave

David Werth 
Garmin AT, Inc 
(formerly: UPS Aviation Technologies) 
(formerly: II Morrow) 
Salem, Oregon 
dave.werth AT garmin DOT com 

-----Original Message-----
From: rdoering AT comcast DOT net [mailto:rdoering AT comcast DOT net] 
Sent: Monday, January 24, 2005 11:55 AM
To: Legato NetWorker discussion; Werth, Dave; NETWORKER AT LISTSERV.TEMPLE DOT 
EDU
Subject: Re: [Networker] Installing Legato on VMS

 

It looks to me like he has the drive mounted properly.

 

For the set default command, use "set def TEST1$DQA0:[000000]"

 

Then the "dir" command will show you the files there.

 

Randy

 

 

-------------- Original message -------------- 

> Dave, 
> 
> I think the problem with getting a 'DIR' is that you probably have the CD 
> mounted as a tape device rather than a file device. It's been a while
since 
> I have worked much with VMS but I think the command you want is 
> 'MOUNT/OVERRIDE=IDENTIFICATION' to get it mounted as a file type device. 
> 
> Also, IIRC if the drive is 'Mounted allocated' you can only access it from

> the process that mounted it. 
> 
> So, what I think would work is this: 
> 
> $ DISMOUNT/NOUNLOAD TEST1$DQA0: 
> $ MOUNT/OVERIDE=ID TEST1$DQAO: 
> 
> Hope this helps, Dave. 
> 
> David Werth 
> Garmin AT, Inc 
> (formerly: UPS Aviation Technologies) 
> (formerly: II Morrow) 
> Salem, Oregon 
> dave.werth AT garmin DOT com ! 
> 
> -----Original Message----- 
> From: Dave Martini [mailto:e571694 AT MAIL.LLNL DOT GOV] 
> Sent: Monday, January 24, 2005 11:07 AM 
> To: NETWORKER AT LISTSERV.TEMPLE DOT EDU 
> Subject: [Networker] Installing Legato on VMS 
> 
> I'm installing Networker 7.1 onto OpenVMS. 
> My knowledge of VMS is limited. 
> I have the CD in the drive and mounted it. 
> 
> But I can't figure out how to cd into the cdrom directory that contains 
> the networker files. 
> Can someone provide me with the correct commands. 
> The install guide for networker for VMS is not real helpful. 
> 
> Do I type 
> $@sys$update:vmsinstall 
> 
> But what is the product name? I suppose a dir on the cd would give me
that. 
> 
> David Martini 
> LLNL 
> 
> 
> The CD is device DQA0: 
> 
> 
> $ show dev d 
> 
> Device Device Error Volum! e Free 
> Trans Mnt 
> Name Status Count Label 
> Bl ocks Count Cnt 
> TEST1$DKB0: Mounted 0 ALPHASYS 
> 9710100 470 1 
> TEST1$DQA0: Mounted alloc 0 NETWORKER_VO 
> 0 1 1 
> wrtlck 
> TEST1$DQA1: Online 1 
> TEST1$DQB0: Online 1 
> TEST1$DQB1: Online 1 
> TEST1$DVA0: Online 0 
> $ 
> $ 
> $ set default $DQA0: 
> $ dir 
> %DIRECT-E-OPENIN, error opening $DQA0:[SYSMGR]*.*;* as input 
> -RMS-F-DEV, error in device name or inappropriate device type for
operation 
> $ show default 
> $DQA0:[SYSMGR] 
> %DCL-I-INVDEF, $DQA0:[SYSMGR] does not exist 
> $ 
> 
> -- 
> Note: To sign off this list, send a "signoff networker" command via email 
> to listserv AT listserv.temple DOT edu or visit the list's Web site at 
> http://listserv.temple.edu/archives/networker.html where you can 
> also view and post messages to the list. Questions regarding this list 
> should be sent to stan AT temple DOT edu >
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= 
> 
> 
> ------------------------- 
> This e-mail and any attachments may contain confidential material for the
sole 
> use of the intended recipient. If you are not the intended recipient,
please be 
> aware that any disclosure, copying, distribution or use of this e-mail or
any 
> attachment is prohibited. If you have received this e-mail in error,
please 
> contact the sender and delete all copies. 
> Thank you for your cooperation 
> 
> -- 
> Note: To sign off this list, send a "signoff networker" command via email 
> to listserv AT listserv.temple DOT edu or visit the list's Web site at 
> http://listserv.temple.edu/archives/networker.html where you can 
> also view and post messages to the list. Questions regarding this list 
> should be sent to stan AT temple DOT edu 
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*! =*=*=*=*=*=*=*=*=*=*=*= 


--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listserv.temple DOT edu or visit the list's Web site at
http://listserv.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=