The problem is with the output of the inquire command when run under
Windows 2003 with StorPort drivers installed for my HBAs. I am running
Qlogic 2340 HBAs. When running the older driver, 8.2.2.25, I can see
the \\.\TapeX device paths in the inquire output, however, not all of my
LUNs show up. When I upgrade to the StorPort based driver version
9.0.1.17 I see all my LUNs, but I cannot see the device paths. I am
getting issues with devices being out of order and without the inquire
output, it is difficult to troubleshoot. Any ideas?
All of my Windows 2000 Storage Nodes show the inquire output like as
follows:
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape0
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape1
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape2
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape3
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape4
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape5
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape6
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape7
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape8
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape9
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape10
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape11
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape12
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape13
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape14
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape15
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape16
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape17
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape18
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape, \\.\Tape19
Windows 2003 shows it like this:
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
[email protected]:SEAGATE ULTRIUM06242-XXX1603|Tape
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list. Questions regarding this list
should be sent to stan AT temple DOT edu
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
