Re: [Networker] SUMMARY: AIT-3 hardware compression on HP-UX 11i
2004-08-04 22:59:29
I have a question for you. Does the hardware compression really help
in your setup ?
Is your network speedy enough to provide sufficient uncompressed
stream in order to keep the drives at their full speed ?
You have mentioned you have 4 AIT-3 drives. To keep them busy (with
hardware compression on) you should feed each of them with 30-35 MB/s,
which comes to 120-140 MB/s for all of them.
I remember I tested hardware compression at some point and I found
that it increased our backup timeframe by 50%, just because the data
stream was not sufficient to feed the drives. So I switched back to
software (client side) compression.
Craig Ruefenacht wrote:
Hi,
As I stated in my latest post, I was able to get our AIT-3 drives to use
hardware compression with Networker.
The trick was to realize that HP-UX 11.11 doesn't create devices for
compression using the insf command (at least, not by default - maybe
there is someway to do it).
You have to manually create a device with compression enabled for each
AIT-3 drive by using the mksf command (not to be confused with the mkfs
command). Then you change the devices in Networker to the
compression-enabled devices, and you are off and running.
An aside: the hardware compression on a AIT-3 drive will compress data
for at least AIT-2 and AIT-3 tapes. We use a mix of both and hardware
compression worked with both types of tapes in the AIT-3 drive.
--
Craig Ruefenacht
UNIX Systems Administrator
USANA Health Sciences
http://www.usana.com
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
|
|