I wish I could read Hrvoje's response, but ...
1. I don't think you can use the -H option for a single drive.
2. Maybe Solaris behaves better than Windows, but it's been my experience
(since 6.1.3) that a hung nsrjb process will block any successive nsrjb
commands. Try to find the "nsrjb -l ..." process that was trying to mount
the volume and kill it.
3. In an AlphaStor environment, the "nsrjb -H" command doesn't actually
reset the jukebox, just tries to re-sync slot status with AlphaStor.
Use "nsrjb -HHv" to get NetWorker to realize that the drives have been
unloaded. Unfortunately, this will interrupt any other backups in progress.
4. Stopping and re-starting NetWorker services may have the same effect,
but you shouldn't have to delete and re-create the device.
HTH
cf
On Thu, 15 Jul 2004 09:36:12 +0200, Thorsten Linow
<Linow.Thorsten AT TALKLINE DOT DE> wrote:
>Hi,
>We're running Networker 7.1.2 and Alphastor 3 SR2 together on on Sun V880
Server.
>Our STK9840 tapedrives are connected via SAN and controlled by ACSLS.
>The bunch of STK9840 Tapedrives are configuerd as smartmedia-jukebox_9840
in networker
>another bunch of STK9940B Tapedrives are configured as smartmedia-
jukebox9940 in Networker
>Now we have a logical 9840 drive in the networker GUI having the status
verify label.
>-The volume is clearly mounted in Alphastor and in ACSLS.
>-The status inside the networker GUI is verify label and a "mt -
f /dev/rmt/7cbn status " shows me a mounted tape.
>-The tape is not unloadable by networker.
>-asvolunmount will sucessfully unmount the alphastor and acsls device but
not the logical networker device.
>-Setting the drive into servicemode wouldn't help.
>-"mt -f /dev/rmt/7cbn release" or "mt -f /dev/rmt/7cbn offline wouldn't
clear the loaded slots, loaded barcode and loaded volume entries
> for the logical device inside the (smartmedia-)jukebox inside networker-
GUI.
>-deleting the enties in loaded slots, loaded barcodes and loaded volumes
for the coresponding logical drive inside the jukebox-configuration is not
allowed anymore
> since NW7.1.2
>-"nsrjb -vvvH f drive98_40" takes houres without sucess.
>
>Any sugestions else than delete and create logical drive in networker or
restarting networker?
>
>Thank's in advance & kind Regards Thorsten Linow
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|