We are replacing our old system with both new hardware and Networker 7.1.X.
I am having some problems with configuring the new tape drives and could use
some assistance. The configuration is as follows:
SUN v440 - Solaris 9 with all of the latest patches
Drivers installed for scsi cards.
Quantum M2500 tape library with 2 - HP LTO 2 tape drives
-- the drives are scsi ids 1&2, where 1 = /dev/rmt/1cbn and 2 =
/dev/rmt/0cbn (I know it's confusing and it will be addressed)
Networker 7.1.2 - still in eval mode pending license enabler install
I put the following lines into the st.conf file per HP's information
tape-config-list =
"HP Ultrium", "HP Ultrium", "ULTRIUM";
ULTRIUM = 1, 0x36, 0, 0xd639, 4, 0x00, 0x00, 0x00, 0x42, 3;
name = "st" class = "scsi" target = 1 lun = 0;
name = "st" class = "scsi" target = 2 lun = 0;
I have 2 test tapes in the jb, labelled and barcoded "DEV.001" and
"DEV.002". When I try labelling, I can sometimes get one or both of them to
be labelled and recognized as available volumes. When I try just mounting a
tape or performing a rudamentary backup I receive the following errors:
Jul 12 15:30:21 devtest root: [ID 702911 daemon.notice] NetWorker media:
(info) LTO Ultrium-2 tape DEV.001 will be over-written
Jul 12 15:30:23 devtest root: [ID 702911 daemon.notice] NetWorker media:
(warning) /dev/rmt/1cbn reading: read open error: drive status is Drive repo
rts no error - but state is unknown
Jul 12 15:30:26 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:26 devtest Target synch. rate reduced. tgt 1 lun 0
Jul 12 15:30:26 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:26 devtest Parity Error
Jul 12 15:30:29 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:29 devtest Target synch. rate reduced. tgt 1 lun 0
Jul 12 15:30:29 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:29 devtest Parity Error
Jul 12 15:30:32 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:32 devtest Target synch. rate reduced. tgt 1 lun 0
Jul 12 15:30:32 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:32 devtest Parity Error
Jul 12 15:30:35 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:35 devtest Target synch. rate reduced. tgt 1 lun 0
Jul 12 15:30:35 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:35 devtest Parity Error
Jul 12 15:30:38 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:38 devtest Target synch. rate reduced. tgt 1 lun 0
Jul 12 15:30:38 devtest scsi: [ID 107833 kern.warning] WARNING:
/pci@1d,700000/pci@2/scsi@5 (qus1):
Jul 12 15:30:38 devtest Parity Error
Jul 12 15:40:38 devtest root: [ID 702911 daemon.notice] NetWorker media:
(warning) /dev/rmt/0cbn reading: read open error: drive status is There is n
ot a tape in the drive
The question is...Where do I begin? My old v6.0.3 w/DLT7000 on Solaris v7
hums along and provides no clues.
Patti Clark
Unix System Administrator
Office of Scientific and Technical Information
<mailto:clarkp AT osti DOT gov>
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
