Thanks!

I've got 280 clients so hopefully it'll use all 4 of the trunked links.

Joel 

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Matthew Huff
Sent: Wednesday, July 07, 2004 8:56 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Sun Trunking

It works fine, just keep in mind that if you are going from one host to
just one other host, it will only use 1 of the 4 links. Of course, a
backup server is almost the ideal box to use trunking as you will have a
many clients talking to the one trunked server. The switch will use the
MAC addresses on the clients to hash to a particular card. However,  if
you have a one or two big servers that have all your data, you won't
find much improvement, you would be better off with a gigabit card then.



----
Matthew Huff           | One Manhattanville Rd
Director of Operations | Purchase, NY 10577
OTA LLC                | Phone: 914-460-4039 
http://www.otaotr.com  | Fax:   914-460-4139    

> -----Original Message-----
> From: Joel Fisher [mailto:jfisher AT WFUBMC DOT EDU]
> Sent: Wednesday, July 07, 2004 8:52 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Sun Trunking
> 
> 
> Hello,
>  
> Is anyone using Sun Trunking successfully.  We are buying a V880 with 
> a Quad GigE Copper NIC that I would like to trunk across all four 
> ports. We have Cisco catalyst switchs.  Any big gotchas I should look 
> for?
>  
> Thanks,
> 
> Joel
> 
> --
> Note: To sign off this list, send a "signoff networker" 
> command via email to listserv AT listmail.temple DOT edu or visit the list's 
> Web site at http://listmail.temple.edu/archives/networker.> html where

> you can also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
> 
> 

--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=