Yes, when we recently got a new e-mail server from the company that bought
us it wasn't set up to accept the smtp messages that blat sends. We had to
find an address on the corporate network that would accept smtp and pass it
on to the primary exchange server at corporate headquarters.
On top of that I was sending the messages to my home account so I could
verify backups on weekends and those messages stopped because my ISP's email
server could not verify the return address from blat so I had to make blat
fake the return address as something that could be verified on the corporate
network.
Hope this helps.
David Werth
Garmin AT, Inc
(formerly: UPS Aviation Technologies)
(formerly: II Morrow)
Salem, Oregon
dave.werth AT garmin DOT com
-----Original Message-----
From: Evan Gold [mailto:egold AT FSA DOT COM]
Sent: Monday, April 05, 2004 9:03 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] bootstrap notification with blat
also try using blat manually from dos to see if its working with your new
mail server.
Evan Gold
Financial Security Assurance
Tel: 212.893.2762
Fax: 212.339.0852
Michael Brooks
<MichaelB@SEQUOIA
INS.COM> To
Sent by: Legato NETWORKER AT LISTMAIL.TEMPLE DOT EDU
NetWorker cc
discussion
<NETWORKER@LISTMA Subject
IL.TEMPLE.EDU> [Networker] bootstrap notification
with blat
04/05/2004 11:31
AM
Please respond to
Legato NetWorker
discussion
<NETWORKER@LISTMA
IL.TEMPLE.EDU>;
Please respond to
Michael Brooks
<MichaelB@SEQUOIA
INS.COM>
hello all- anyone use blat for notifications? if so, we are having an
issue receiving notifications and would appreciate some help. we have
been using blat for bootstrap notifications for about a year now. the
command looks like blat - -to <email address> -s "<networker server>
bootstrap" -server <email server name>. this command has been working,
and i was receiving notifications just fine, but when we changed email
servers, both hardware and software (was exchange 5.5/w2k sp4, now
exchange 2k3/w2k3), the notifications stopped. the only difference in
the command is that i changed the email server's name to reflect the new
one; i tried using FQDN but this did not help either. the only other
change i can think of is that i upgraded the networker server to 7.1.
info:
networker server: networker 7.1, w2k sp4
email server: networker 7.1, w2k3, xchange 2k3
any ideas? thanx
michael brooks ............... michaelb AT sequoiains DOT com
Network Administrator ........ 831.657.4539 phone
Sequoia Insurance Company .... 831.657.4512 fax
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
-------------------------
This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient. If you are not the intended recipient, please
be aware that any disclosure, copying, distribution or use of this e-mail or
any attachment is prohibited. If you have received this e-mail in error,
please contact the sender and delete all copies.
Thank you for your cooperation
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
