Hi Guy,

Sounds like interference from the Windows Removable storage Manager to me.
Have you turned it off as per the installation guide/release supplement
(can't remember which one it is in!).

>From the sound of your description NetWorker is trying to talk to the tape
library but has found that something else has already grabbed the library.

Hope this helps

Mark

> Greetings,
>
> I have a question that I hope you folks can help with.
>
> I have a networker data zone with an AIX server, One AIX storage node and One
> windows stroage node.
> They all share a silo. I am trying to add a new windows storage node with a
> local auto changer.
> The new storage node can talk with the server and the server can see the new
> drive (DLT8000).
>
> The problem is that I cannot configure the auto changer. The inquire command
> sees both the drive and the autochanger.
> When I run the jbconfig command, it gets to the end and says it can't talk to
> the controller port and I must
> have a bad driver. We already reloaded the driver so I am thinking it may be a
> permissions issue. The windows
> machine says the driver and device are fine.
>
> Any ideas?
>
> Thanks in advance.
>
> Guy Novello
> Private HealthCare Systems
> 781-895-3117
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=