thanks ill try it.
what command in solaris did u use to do this?

Evan



             Jon Hickmott
             <jonny AT UWO DOT CA>
             Sent by: Legato                                            To
             NetWorker                 NETWORKER AT LISTMAIL.TEMPLE DOT EDU
             discussion                                                 cc
             <NETWORKER@LISTMA
             IL.TEMPLE.EDU>                                        Subject
                                       Re: [Networker] legato tape drive
                                       ordering with fiber drives thru a
             02/24/2004 02:14          brocade switch?
             PM


             Please respond to
             Legato NetWorker
                discussion
             <NETWORKER@LISTMA
              IL.TEMPLE.EDU>;
             Please respond to
               Jon Hickmott
              <jonny AT UWO DOT CA>






Our environment is close to this except we have a solaris 9 box as our
server. To get
around the tape drive order issue we statically maped the tape drives
to the server by
WWNN. This is done in the configuration of the HBA in the solaris
server. Depending
on the HBA you use in your Windows server you may have the option to do
this same
kind of static mapping. Not all HBAs have this ability.

Good Luck
Jon

Unix/DB admin - University of Western Ontario.

Evan Gold wrote:

>I run legato 7.1.1 on win2000
>i have a storagetek l180 library with 6 fiber hp lto2 tape drives
>the drives are connected thru 2 brocade switches
>the switches have NO zones setup and all ports can see all other ports
>
>i am trying to re-cable the fiber drives so that the "inquire" output
>matches the "sjisn 2.0.0" output.
>I dont know if im missing something, but no matter which ports i put which
>drives into on the brocade, i cannot get the real tape0 to become the
>virtual tape0 with the above commands. with old scsi drives this was easy,
>but with the fiber drives i cant get it to work.
>
>has anyone seen this issue and  fixed it?
>
>my work around is to enter the drives into "jbconfig" in the order that
>"sjisn 2.0.0" told me to, so now when you look at the library in legato,
>the drives are not in order, but i really want them to be in the real
>order.
>
>thank you in advance.
>
>
>
>here is my inquire and sjisn outputs (note: i have unplugged the 2nd hba
>for troubleshooting)
>
>C:\Documents and Settings\Administrator>sjisn 2.0.0
>Serial Number data for 2.0.0 (STK      L180            ):
>        Library:
>                Serial Number: MPC02209470
>        Drive at element address 500:
>                SCSI-3 Device Identifiers:
>                        VENN:HUM3G00040
>        Drive at element address 501:
>                SCSI-3 Device Identifiers:
>                        VENN:HUM3G00050
>        Drive at element address 502:
>                SCSI-3 Device Identifiers:
>                        VENN:HUM3G00246
>        Drive at element address 503:
>                SCSI-3 Device Identifiers:
>                        VENN:HUM3G00255
>        Drive at element address 504:
>                SCSI-3 Device Identifiers:
>                        VENN:HUM3G00046
>        Drive at element address 505:
>                SCSI-3 Device Identifiers:
>                        VENN:HUM3G00349
>
>C:\Documents and Settings\Administrator>
>
>
>C:\Documents and Settings\Administrator>inquire
>[email protected]:TEAC    CD-224E         9.9A|CD-ROM
>[email protected]:STK     L180            0306|Autochanger (Jukebox),
>\\.\Changer0
>                                           S/N: MPC02209470
>[email protected]:COMPAQ  SCSI COMMUNICATECISS|Unknown Device Type
>[email protected]:COMPAQ  LOGICAL VOLUME  2.56|Disk, \\.\PHYSICALDRIVE0
>
>WWNN:600508B1001841385850494356340002
>
>[email protected]:COMPAQ  LOGICAL VOLUME  2.56|Disk, \\.\PHYSICALDRIVE1
>
>WWNN:600508B1001841385850494356340003
>
>[email protected]:HP      Ultrium 2-SCSI  K342|Tape
>                                           S/N: HUM3G00050
>                                           ATNN:HP      Ultrium 2-SCSI
>HUM3G000
>50
>                                           WWNN:50060B00001E6372
>[email protected]:HP      Ultrium 2-SCSI  K342|Tape
>                                           S/N: HUM3G00040
>                                           ATNN:HP      Ultrium 2-SCSI
>HUM3G000
>40
>                                           WWNN:50060B00001E634A
>[email protected]:HP      Ultrium 2-SCSI  K342|Tape, \\.\Tape0
>                                           S/N: HUM3G00246
>                                           ATNN:HP      Ultrium 2-SCSI
>HUM3G002
>46
>                                           WWNN:50060B00001E6682
>[email protected]:Emulex  Utility Ifc Dev.EMU2|(Unknown Device Type b)
>[email protected]:Emulex  Utility Ifc Dev.EMU2|(Unknown Device Type b)
>
>C:\Documents and Settings\Administrator>
>
>--
>Note: To sign off this list, send a "signoff networker" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=