Legato 7.1

I have 4 tape drives and 9 times out of 10 only two of them are being
utilized.  How can I make it so that all four will be used during
backups? Or how can I just make sure that whatever job it's doing only
needs two drives?


Thanks,
Brian 

-----Original Message-----
From: Dan Tulovsky [mailto:dtulovsky AT sbigroup DOT com] 
Sent: Tuesday, February 24, 2004 11:07 AM
To: Legato NetWorker discussion; Spindler, Brian
Subject: RE: [Networker] Unload retry

I get this once in a while too.  If it eventually manages to unload the
tape, then it's ok.  It means networker is waiting for the tape drive...
If it gets stuck, it might be a hardware issue.

Dan
 

-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Spindler, Brian
Sent: Tuesday, February 24, 2004 10:44 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Unload retry

Hi guys/gals,
  I keep getting this message (Legato 7.1):
NetWorker media: (info) unload retry for jukebox `QualStar8466' failed -
will retry again.

I am very new to Legato, how can I fix this?


Thanks,
Brian
--
Note: To sign off this list, send a "signoff networker" command via
email to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=