Hi Thomas,

Could you mention what type of connect you are using to the drives/robot. If 
you are using a P3000, chances are you are on a SAN and have some sort of 
fabric between the hosts and the library. Make sure that the SCSI maps on the 
SAN are not changing. Persistent binding will help in this case. 

Sumash

-----Original Message-----
From: Thomas Mawick [mailto:thomas.mawick AT ZEDA DOT DE]
Sent: 13 November 2003 12:53 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] jbconfig after restart Server


Hello,

I have a big problem.

When I restart my Networker Server I have to do a new jbconfig, because the
Networker loads the tapes in the wrong device.

For exaample:

Networker wrote:

loading tape CWM001 into \\.\Tape0

the Tape will mounted in the \\.\Tape0 from the Storage Node.

After a new jbconfig...all is running and the Networker load the tape in
the right tape.

We use

Networker 6.1.3 on Windows and a ATL P3000 DLT Library


Anybody a idea ???!!!

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=