Networker

Re: [Networker] Adding Storage Node

2003-10-21 14:58:07
Subject: Re: [Networker] Adding Storage Node
From: "McDougal, Philip H" <PMcDougal AT JENNER DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Tue, 21 Oct 2003 13:56:32 -0500
Hello,
 
I'm having issues installing a remote storage node on a Win2003 client (client 
has 7.1 and server has WIn2000 with  6.1.3 and savegrp patch).  I've tried 
disabling and enabling RSM but it doesn't matter, I run jbconfig and I get the 
following message... Inquire shows the changer and both drives.  And after this 
message, the drives are in the Devices location but not in the Autochanger.
 
 
C:\>jbconfig -s chntbkp01
 
On a storage node, the hostname is a prefix to the jukebox name.
Enter the hostname to use as a prefix? [chntbkp02]
using 'chntbkp02' as the hostname prefix
 
         1) Configure an AlphaStor/SmartMedia Jukebox.
         2) Configure an Autodetected SCSI Jukebox.
         3) Configure an Autodetected NDMP SCSI Jukebox.
         4) Configure an SJI Jukebox.
         5) Configure an STL Silo.
         6) Configure a Microsoft Removable Storage Jukebox.
 
What kind of Jukebox are you configuring? [1] 2
Installing 'Standard SCSI Jukebox' jukebox -  <mailto:[email protected]> 
[email protected].
 
What name do you want to assign to this jukebox device? Compaq
using 'rd=chntbkp02:Compaq' as jukebox device name
Turn NetWorker auto-cleaning on (yes / no) [yes]? yes
 
The following drive(s) can be auto-configured in this jukebox:
 1> sdlt @ 2.1.0 ==>  <file://\\.\Tape0> \\.\Tape0
The 1 drive(s) that cannot be auto-configured will be addressed in a moment,
 but first:
Do you want to configure any of the detected drives as shared or NDMP
drives or otherwise manually change their configuration? (yes / no) [no] no
 
Please enter the device path information in one of the following formats:
 
         <file://\\.\Tape0> \\.\Tape0 --for local path or
        host:device-path --for remote node or
        host:drive-letter:directory path --for Windows disk file
 
You will be prompted only for those drives that could not be auto-configured;
the others will be skipped. Please provide the paths for these drives:
 
Drive  2, element 481
Drive path ? chntbkp02:\\Tape1
stat error: device `\\Tape1' does not exist.
Pathname '\\Tape1' is not valid. Please try again.
Drive path ? chntbkp02:\\.\Tape1
 
Only model sdlt drives have been detected.
Are all drives in this jukebox of the same model?  (yes / no) [yes] yes
 
A Dedicated Storage Node can backup only local data to its devices.
Should chntbkp02 be configured as a Dedicated Storage Node? (yes / no) [no] no
 
jbconfig: RAP error: 'read_elem_unload_fail' invalid choice for 'jukebox feature
s'
 
C:\>

 
Any help or guidance would be appreciated, thank in advance 
 
Phil M..
 

-----Original Message----- 
From: Riaan Louwrens [mailto:riaanl AT SOURCECONSULTING.CO DOT ZA] 
Sent: Tue 10/21/2003 11:54 AM 
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU 
Cc: 
Subject: Re: [Networker] Adding Storage Node



Hi,

You would have to configure the client in Legato.

Make sure the SCSI is setup 100% on the client (acces to tapes etc).

And then in the client configuration properties you add in the "storage
node" box its own name.

You would then have to add the device (or library) to Legato in the devices
tab. (rd=).

All pretty wel documented though.

Regards,
riaan

-----Original Message-----
From: Ray lee [ mailto:rlee0004 AT TAMPABAY.RR DOT COM]
Sent: Tuesday, October 21, 2003 6:15 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Adding Storage Node


We are adding a new StorageNode/Client to our current setup. What are the
correct steps in adding a new SN/Client into Legato?

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=


<Prev in Thread] Current Thread [Next in Thread>