I'm trying to scan some old DLT2000 tapes from a previous installation of
Networker. I believe that the old tapes were created on Solaris 2.51 system
running Networker 5.x. The current installation of Networker is 6.12
running on Solaris 8. The current tape is NOT the original hardware used
when the savesets were created. The following is the error I'm seeing:

# scanner -n /dev/rmt/1n
scanner: scanning dlt tape Weekly.001 on /dev/rmt/1n
scanner: fn 2 rn 0 read error Not enough space
scanner: fn 2 rn 0 read error Not enough space
scanner: done with dlt tape Weekly.001


Does anybody seen something similar? Any suggestions.

Thanks,
Mark Brennan

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=