[Networker] Re: NSR sees a tape, which isn´t there

IMHO, to prevent unnecessary problem regarding list tape,
we have to inventory the tape list from GUI (since I never
do it from command line.. :D).
Because we get problem once related with different tape list
from nsrjb result comparing with tape list at the jukebox panel.

Usually we can do it after we replace and labeling tapes media.
So both list will be synchronized at that time.
Hope this info useful.

Thank you for your supports and cooperations.

Wassalam,
_________________________________________
Irwan Kurniawan
TAC2 Engineer - ICM N MS
PT Siemens Indonesia
Jl. MT Haryono Kav. 58-60
Jakarta 12780 - Indonesia
Phone : +62 21 2750 8 183
Mobile : +62 816 199 6920

"Better team-works can lead us to better results"
_________________________________________

-----Original Message-----
From: Faidherbe, Thierry [mailto:thierry.faidherbe AT hp DOT com] 
Sent: Wednesday, 13 August 2003 00:52
To: Irwan Kurniawan
Cc: Legato NetWorker discussion
Subject: RE: [Networker] RE: [Networker] Re: [Networker] NSR sees a tape, which 
isn´t there

FYI, This trick will not work anymore in 7.x because /nsr/res/nsr.res
and nsrjb.res will be converted into a dir structure. 

HTH,

Th

Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

-----Original Message-----
From: Irwan Kurniawan [mailto:Irwan.Kurniawan AT SIEMENS DOT COM] 
Sent: Tuesday, August 12, 2003 9:00 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] RE: [Networker] Re: [Networker] NSR sees a tape, which 
isn´t there

Yes, in my experience, we shutdown the networker service and
edit /nsr/res/nsr.res.
Remove incorrect loaded slot, barcode and label.
It's could be risky.. But if we know what we're doing..
I don't think so.. :D

Wassalam,
Irwan Kurniawan

"Better team-works can lead us to better results"
_________________________________________

-----Original Message-----
From: Matt Temple [mailto:mht AT RESEARCH.DFCI.HARVARD DOT EDU] 
Sent: Tuesday, 12 August 2003 07:00
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Re: [Networker] NSR sees a tape, which isn´t there

In Networker Version 7 of nwadmin, by following media-->devices-->show details,
the "Loaded Devices" window allows you do do normal add/delete/change.
It has three windows -- loaded volumes / loaded bar codes / loaded slots.
Underneath it all, there's still a res file but in a subdirectory and with
a file that has an inscrutable name.   (you _could_ edit it after shutting down
Networker, but that is risky, I agree.)
                                                                        Matt 
Temple

Shut down Networker.   If you're using versions previous
On Monday, Aug 11, 2003, at 13:46 US/Eastern, Davina Treiber wrote:

> Gross Nikolaus wrote:
>
>> is there a possibility to unmount a drive with sun solaris 8.
>> I have a Storagetek L700 and and NSR 6.1.3.
>> when I perform a nsrjb -H(E) it doesn´t react.
>> In horizon I can see that the tape isn´t in the drive, with NSR it is 
>> in a drive.
>> I restartet NSR, but with no effect.
>
> The previous suggestions about putting the correct tape back in the
> drive are valid, but may be rather inconvenient if your library is
> remote. The other way is to tell NetWorker that the drive is empty. 
> This information is stored in the NSR jukebox resource and can be edited
> with extreme care using nwadmin or nsradmin. There are three fields that
> need to be modified, they are called "loaded slots", "loaded volumes",
> and "loaded bar codes". Each of these fields has multiple values, comma
> separated, and you MUST keep the same number of values. Edit rather than
> deleting each field. It is fiddly and is easier if you write a script
> for this. The one I have isn't quite suitable for general release just
> yet for various reasons including copyright.

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=