Thanks Jean,

I have few sites using M1500 with HP LTO drives for solaris 8 without any
problem. That make me confuse is that due to Windows or nsrclone for
windows.

Already escalated to Legato, hopefully that is a patch for NW 6.1.3 to this
issue.

Cheers...
Robert

-----Original Message-----
From: Girot, Jean-Pierre [mailto:Jean-Pierre.Girot AT FR.MTI DOT COM]
Sent: Wednesday, June 25, 2003 3:10 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] W2K nsrclone I/O error


Hello,

I think the problem is LTO HP 
Do you try to recover a lot of data from tape.
The last time that I have some problem with HP LTO we change it by seagate
LTO drive and after this exchange everything works fine.

Regards

Jean-Pierre GIROT.


-----Message d'origine-----
De : Robert Loh [mailto:robert AT SOFTSOURCE.COM DOT SG]
Envoyé : mercredi 25 juin 2003 03:50
À : NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Objet : [Networker] W2K nsrclone I/O error


Hi all,

On W2K NW 6.1.3 during cloning hitting below error
06/23/2003 11:03:10 AM nsrd: media warning: \\.\Tape0 reading: The request
could not be performed because of an I/O device error.

Have tried to change the drive, the terminator/cable, upgraded the ATL M1500
firmware and both HP LTO drives firmware to no avail. Believe must be to do
with nsrclone, without problem backing up.

Any clues :) ?
Cheers..
Robert

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=