Networker

Re: [Networker] Networker 6.1.3 on W2K and NDMP Backup for EMC Ce lerra

2003-05-14 16:58:51
Subject: Re: [Networker] Networker 6.1.3 on W2K and NDMP Backup for EMC Ce lerra
From: Bokkelkamp Ernst <ernst.bokkelkamp AT SIEMENS DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Wed, 14 May 2003 22:58:06 +0200
Oh, oh, I didn't catch that.

Jim,

Tien is right, NDMP is only supported on 6.2 and 7.0 under Windows NT.

Bye
Ernie


-----Original Message-----
From: Neild, Jim [mailto:Jim.Neild AT SSHA.ON DOT CA]
Sent: Wednesday, May 14, 2003 8:08 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Networker 6.1.3 on W2K and NDMP Backup for EMC
Celerra


Yes it does, or at least it appears to based on configuration of my JB
and clients under 6.1.3.

When running JBCONFIG, it asks me whether my device I am currently
defining is an NDMP drive, if I say yes, I must provide NDMP user ID and
password.

When setting up clients, I can specify whether a client is an NDMP
client or not.

To me this would indicate that NDMP is supported.

Jim
-----Original Message-----
From: Tien Ly [mailto:tly AT legato DOT com]
Sent: Wednesday, May 14, 2003 1:59 PM
To: Neild, Jim
Subject: RE: [Networker] Networker 6.1.3 on W2K and NDMP Backup for EMC
Celerra



        Jim,

        NetWorker 6.1.3 For Windows does not support NDMP.

        NetWorker 6.2 For Windows and NetWorker 7.0 For Windows support
NDMP.

        Hope this helps,
        Tien


        > -----Original Message-----
        > From: Neild, Jim [mailto:Jim.Neild AT SSHA.ON DOT CA]
        > Sent: Wednesday, May 14, 2003 10:56 AM
        > To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
        > Subject: [Networker] Networker 6.1.3 on W2K and NDMP Backup
for EMC
        > Celerra
        > Importance: High
        >
        >
        > Any help with getting our 6.1.3 NDMP backups running for our
Celerra
        > would be greatly appreciated.
        >
        >
        > We have the following configuration....
        >
        > STK L700 with 2 Drives connected to FC/SCSI routers on SAN
        > EMC Celerra with an NDMP enabled HBA which sees 2 drives and
the robot
        > arm
        > Networker 6.1.3 on W2K with an HBA that sees the same 2 drives
and arm
        > (which it controls)
        >
        >
        >
        >
        >
        > What we want....
        >
        > Networker to have Celerra as a client and use NDMP to make the
Celerra
        > backup driectly from its disks across FC to the tapes.
        >
        >
        >
        > What we have configured and tried....
        >
        > When running JBCONFIG, we setup the two physical drives on
both the NW
        > Server and the Celerra.  For the NW Server, the drives are not

        > configured for NDMP.  For the Celerra definitiions of the
drives, they
        > are NDMP enabled.
        >
        > Celerra host is setup as an NDMP enabled clients and with
        > itself as the
        > storage node.  This client is in the NDMP group.
        >
        > Pool setup called Celerra that has the NDMP drives of the
Celerra
        > checked and serves the NDMP group.
        >
        >
        > When executing a job with the above configuration, we get
media errors
        > "check storage nodes, devices, pools".
        >
        > If we modify the pool to use the Networker drives and set the
Celerra
        > client to use the Networker server as the Storage Node, the
Networker
        > connects, mounts a tape, and backup goes.  However, the
        > backup is across
        > the LAN, which would be expected, but is not the desired
result.
        >
        >
        >
        > Cheers,
        > Jim
        >
        > --
        > Note: To sign off this list, send a "signoff networker"
        > command via email
        > to listserv AT listmail.temple DOT edu or visit the list's Web site
at
        > http://listmail.temple.edu/archives/networker.html where you
can
        > also view and post messages to the list.
        >
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
        >



--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>