Erik,
The following would be your problem:
* asterix.arch.chalmers.se:All 2003-03-10 18:01:02 nsrexec: nsrexecd on
asterix.arch.chalmers.se is unavailable. Using rsh instead.
It says that nsrexecd is unavailable. It then reverts to rsh which of
course does not succeed.
If you do a "net start" from a dos prompt is the NetWorker Remote Exec
Service running? You could also check control panel -> services of
course as well.
Thanks,
Carston
-----Original Message-----
From: Legato NetWorker discussion
[mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]On Behalf Of Erik Andersson
Sent: Monday, March 10, 2003 9:34 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] connection refused
Hi,
I tried your your command and this is the result
( perhaps you understand more of it than I do..)
D:\win32app\nsr\bin>savegrp -vvv -r1 -D3 -c asterix -G manuell >test.log
2003-03-10 18:00:51 savegrp:
Calling clnttcp_create function2003-03-10 18:00:51 savegrp:
Calling clnttcp_create function2003-03-10 18:00:51 savegrp: port = 17358,
res = 0, errno
= 22
2003-03-10 18:00:51 savegrp: port = 17359, res = 0, errno = 0
2003-03-10 18:00:51 savegrp: lgto_auth for `nsrd' succeeded
2003-03-10 18:00:52 savegrp:
Calling clnttcp_create function2003-03-10 18:00:52 savegrp:
Calling clnttcp_create function2003-03-10 18:00:52 savegrp: port = 17360,
res = 0, errno
= 22
2003-03-10 18:00:52 savegrp: port = 17361, res = 0, errno = 0
2003-03-10 18:00:52 savegrp: lgto_auth for `nsrd' succeeded
2003-03-10 18:00:52 savegrp:
Calling clnttcp_create function2003-03-10 18:00:52 savegrp:
Calling clnttcp_create function2003-03-10 18:00:52 savegrp: port = 17362,
res = 0, errno
= 22
2003-03-10 18:00:52 savegrp: port = 17363, res = 0, errno = 135
2003-03-10 18:00:52 savegrp: lgto_auth: redirected to miranda prog 390103
vers 2
2003-03-10 18:00:52 savegrp:
Calling clnttcp_create function2003-03-10 18:00:52 savegrp:
Calling clnttcp_create function2003-03-10 18:00:52 savegrp: port = 17364,
res = 0, errno
= 22
2003-03-10 18:00:52 savegrp: port = 17365, res = 0, errno = 22
2003-03-10 18:00:52 savegrp: lgto_auth for `nsrmmdbd' succeeded
2003-03-10 18:00:52 savegrp:
Calling clnttcp_create function2003-03-10 18:00:52 savegrp:
Calling clnttcp_create function2003-03-10 18:00:52 savegrp: port = 17366,
res = 0, errno
= 22
2003-03-10 18:00:53 savegrp: port = 17367, res = 0, errno = 135
2003-03-10 18:00:53 savegrp:
Calling clnttcp_create function2003-03-10 18:00:53 savegrp:
Calling clnttcp_create function2003-03-10 18:00:53 savegrp: port = 17368,
res = 0, errno
= 135
2003-03-10 18:00:53 savegrp: port = 17369, res = 0, errno = 0
2003-03-10 18:00:53 savegrp: lgto_auth for `nsrd' succeeded
asterix.arch.chalmers.se:All level=incr
2003-03-10 18:00:58 savegrp: Run up to 2 clients in parallel
2003-03-10 18:01:00 savegrp: asterix.arch.chalmers.se:probe
started
savefs -s miranda -c asterix.arch.chalmers.se -g manuell -p -l full -R -v
2003-03-10 18:01:00 savegrp: using `D:\win32app\nsr\bin\nsrexec.exe' as
execpath for `nsre
xec'
2003-03-10 18:01:00 savegrp: nsrexec started, pid 1184
2003-03-10 18:01:53 savegrp: waitchild reaped, pid 1184
2003-03-10 18:01:53 savegrp: command 'savefs -s miranda -c
asterix.arch.chalmers.se -g man
uell -p -l full -R -v ' for client asterix.arch.chalmers.se exited with
return code 9.
2003-03-10 18:01:53 savegrp: asterix.arch.chalmers.se:probe succeeded.
* asterix.arch.chalmers.se:All rcmd asterix.arch.chalmers.se, user root:
`savefs -s mirand
a -c asterix.arch.chalmers.se -g manuell -p -l full -R -v'
* asterix.arch.chalmers.se:All 2003-03-10 18:01:02 nsrexec: nsrexecd on
asterix.arch.chalm
ers.se is unavailable. Using rsh instead.
* asterix.arch.chalmers.se:All 2003-03-10 18:01:00 nsrexec:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:00 nsrexec
:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:00 nsrexec
: port = 15790, res = 0, errno = 2
* asterix.arch.chalmers.se:All 2003-03-10 18:01:01 nsrexec:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:01 nsrexec
: port = 15791, res = 0, errno = 135
* asterix.arch.chalmers.se:All 2003-03-10 18:01:01 nsrexec: Adding port
range (reserved):
600-1023
* asterix.arch.chalmers.se:All 2003-03-10 18:01:01 nsrexec: using reserved
ports to connec
t
* asterix.arch.chalmers.se:All 2003-03-10 18:01:01 nsrexec:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:01 nsrexec
: port = 15792, res = 0, errno = 22
* asterix.arch.chalmers.se:All 2003-03-10 18:01:01 nsrexec:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:01 nsrexec
: port = 15793, res = 0, errno = 135
* asterix.arch.chalmers.se:All 2003-03-10 18:01:01 nsrexec: port = 928, res
= 0, errno = 1
35
* asterix.arch.chalmers.se:All 2003-03-10 18:01:02 nsrexec: port = 929, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:01:04 nsrexec: port = 930, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:01:07 nsrexec: port = 931, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:01:13 nsrexec: port = 932, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:01:22 nsrexec: port = 933, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:01:40 nsrexec: port = 934, res
= 0, errno = 1
61
asterix.arch.chalmers.se: Connection refused
* asterix.arch.chalmers.se:All Connection refused
2003-03-10 18:01:53 savegrp: asterix.arch.chalmers.se:probe will retry 1
more time(s)
2003-03-10 18:01:53 savegrp: asterix.arch.chalmers.se:probe
started
savefs -s miranda -c asterix.arch.chalmers.se -g manuell -p -l full -R -v
2003-03-10 18:01:53 savegrp: using `D:\win32app\nsr\bin\nsrexec.exe' as
execpath for `nsre
xec'
2003-03-10 18:01:53 savegrp: nsrexec started, pid 900
2003-03-10 18:02:47 savegrp: waitchild reaped, pid 900
2003-03-10 18:02:47 savegrp: command 'savefs -s miranda -c
asterix.arch.chalmers.se -g man
uell -p -l full -R -v ' for client asterix.arch.chalmers.se exited with
return code 9.
2003-03-10 18:02:47 savegrp: asterix.arch.chalmers.se:probe succeeded.
* asterix.arch.chalmers.se:All 1 retry attempted
* asterix.arch.chalmers.se:All rcmd asterix.arch.chalmers.se, user root:
`savefs -s mirand
a -c asterix.arch.chalmers.se -g manuell -p -l full -R -v'
* asterix.arch.chalmers.se:All 2003-03-10 18:01:54 nsrexec: nsrexecd on
asterix.arch.chalm
ers.se is unavailable. Using rsh instead.
* asterix.arch.chalmers.se:All 2003-03-10 18:01:53 nsrexec:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:53 nsrexec
:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:53 nsrexec
: port = 15631, res = 0, errno = 2
* asterix.arch.chalmers.se:All 2003-03-10 18:01:53 nsrexec:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:53 nsrexec
: port = 15632, res = 0, errno = 135
* asterix.arch.chalmers.se:All 2003-03-10 18:01:53 nsrexec: Adding port
range (reserved):
600-1023
* asterix.arch.chalmers.se:All 2003-03-10 18:01:53 nsrexec: using reserved
ports to connec
t
* asterix.arch.chalmers.se:All 2003-03-10 18:01:53 nsrexec:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:53 nsrexec
: port = 15633, res = 0, errno = 22
* asterix.arch.chalmers.se:All 2003-03-10 18:01:53 nsrexec:
* asterix.arch.chalmers.se:All Calling clnttcp_create function2003-03-10
18:01:53 nsrexec
: port = 15634, res = 0, errno = 135
* asterix.arch.chalmers.se:All 2003-03-10 18:01:53 nsrexec: port = 849, res
= 0, errno = 1
35
* asterix.arch.chalmers.se:All 2003-03-10 18:01:54 nsrexec: port = 850, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:01:56 nsrexec: port = 851, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:02:00 nsrexec: port = 852, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:02:05 nsrexec: port = 853, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:02:14 nsrexec: port = 854, res
= 0, errno = 1
61
* asterix.arch.chalmers.se:All 2003-03-10 18:02:32 nsrexec: port = 855, res
= 0, errno = 1
61
asterix.arch.chalmers.se: Connection refused
* asterix.arch.chalmers.se:All Connection refused
2003-03-10 18:02:48 savegrp: asterix.arch.chalmers.se:probe will retry 0
more time(s)
2003-03-10 18:02:48 savegrp: asterix.arch.chalmers.se:index
started
save -s miranda -S -g manuell -LL -f - -m miranda -V -t 1047305218 -l 9 -LL
-W 78 -N index
:3a62d91a-00000004-3e6c9a9c-3e6c9a9b-00900000-8110a008
D:\win32app\nsr\index\asterix.arch.
chalmers.se
2003-03-10 18:02:48 savegrp: using `D:\win32app\nsr\bin\nsrexec.exe' as
execpath for `nsre
xec'
2003-03-10 18:02:48 savegrp: nsrexec started, pid 1184
2003-03-10 18:04:53 savegrp: waitchild reaped, pid 1184
2003-03-10 18:04:53 savegrp: asterix.arch.chalmers.se:index succeeded.
* asterix.arch.chalmers.se:index rcmd localhost, user root: `save -s
miranda -S -g manuell
-LL -f - -m miranda -V -t 1047305218 -l 9 -LL -W 78 -N
index:3a62d91a-00000004-3e6c9a9c-3
e6c9a9b-00900000-8110a008
"D:\\win32app\\nsr\\index\\asterix.arch.chalmers.se"'
* asterix.arch.chalmers.se:index save: Saving files modified since Mon Mar
10 15:06:58 200
3.
* asterix.arch.chalmers.se:index uasm: Saving files modified since Mon Mar
10 15:06:58 200
3.
* asterix.arch.chalmers.se:index
D:\win32app\nsr\index\asterix.arch.chalmers.se\
* asterix.arch.chalmers.se:index
miranda: index:asterix.arch.chalmers.se level=9, 1 KB 00:01:07 1
file
* asterix.arch.chalmers.se:index completed savetime=1047315810
* asterix.arch.chalmers.se:index 2003-03-10 18:02:53 nsrexec:
* asterix.arch.chalmers.se:index Calling clnttcp_create function2003-03-10
18:02:53 nsrex
ec:
* asterix.arch.chalmers.se:index Calling clnttcp_create function2003-03-10
18:02:53 nsrex
ec: port = 27195, res = 0, errno = 22
* asterix.arch.chalmers.se:index 2003-03-10 18:02:53 nsrexec: port = 27196,
res = 0, errno
= 22
* asterix.arch.chalmers.se:index 2003-03-10 18:02:54 nsrexec:
* asterix.arch.chalmers.se:index Calling clnttcp_create function2003-03-10
18:02:54 nsrex
ec: port = 27197, res = 0, errno = 22
* asterix.arch.chalmers.se:index 2003-03-10 18:02:54 nsrexec: port = 27198,
res = 0, errno
= 22
* asterix.arch.chalmers.se:index 2003-03-10 18:02:54 nsrexec: port = 8905,
res = 0, errno
= 135
* asterix.arch.chalmers.se:index 2003-03-10 18:03:07 nsrexec: nleft 1 rem
-1: (EOF)
* asterix.arch.chalmers.se:index 2003-03-10 18:04:17 nsrexec: errorfd
rpc_read returns 60
bytes
* asterix.arch.chalmers.se:index 2003-03-10 18:04:26 nsrexec: errorfd
rpc_read returns 60
bytes
* asterix.arch.chalmers.se:index 2003-03-10 18:04:31 nsrexec: errorfd
rpc_read returns 48
bytes
* asterix.arch.chalmers.se:index 2003-03-10 18:04:38 nsrexec: errorfd
rpc_read returns 108
bytes
* asterix.arch.chalmers.se:index 2003-03-10 18:04:40 nsrexec: errorfd
rpc_read returns 1 b
ytes
* asterix.arch.chalmers.se:index 2003-03-10 18:04:40 nsrexec: errorfd NUL
handshake
* asterix.arch.chalmers.se:index 2003-03-10 18:04:40 nsrexec: nleft 0
errorfd -1: (EOF)
* asterix.arch.chalmers.se:index 2003-03-10 18:04:40 nsrexec: out with
nleft 0 errorfd -1,
rem -1, rval 0
2003-03-10 18:14:15 savegrp: nsrim run recently, skipping
D:\win32app\nsr\bin>
--On den 9 mars 2003 17:05 -0800 Carston Locher <clocher AT LEGATO DOT COM>
wrote:
> Erik,
>
> I'm guessing you've already verified this, but is the NetWorker
> Remote Exec service started on the client? That is the most
> common cause of that error message.
>
> It could also be a \nsr\res\servers issue (don't have entry
> for server name). If that file is empty that is fine as well
> (it means any backup server can back it up).
>
> Those would be my first two bets. If that doesn't work I'd
> suggest running "savegrp -vvv -c client -G group" (might throw
> in -D3 flag as well) and sent it to the mailing list.
>
> Thanks,
>
> Carston
>
> -----Original Message-----
> From: Legato NetWorker discussion
> [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]On Behalf Of Erik Andersson
> Sent: Saturday, March 08, 2003 10:25 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] connection refused
>
>
> Hi,
> I run Networker 6.1.3 on a W2000 server and back up clients running NT4,
> W2000
> and LINUX.
> When I try to back up one of the NTclients I get
> "All connections refused"
> As far as I can see I have configured all clients the same way.
> Any ideas what to look for ?
>
> Regards, Erik
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
---------------------------------------------------------------------------
--
Erik Andersson | School of Architecture
System Administrator at arch.chalmers.se | Chalmers University of Technology
| S-412 96 Gothenburg, Sweden
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
