Networker

[Networker] save.exe application error -> client timeout

2003-02-25 03:38:50
Subject: [Networker] save.exe application error -> client timeout
From: Ciprian Badescu <ciprian.badescu AT ALCATEL DOT RO>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Tue, 25 Feb 2003 10:44:54 +0200
Hi,

>From more than a week, we have a error on the Windows NT 4 server,
Networker client. Since then, everything was OK.

The environment is:
Solaris 8 - NetWorker server with SCSI DLT Tape library,
and other solaris and windows clients. Since then, everithing was OK, but
now we have errors. Each time the backup occurs, the files are saved fine
(we tried a restore), but the save.exe program crashes on the windows
server:

The instruction at "0x010cea1f" referenced memory at"0x011c1de0". The
memory could not be "read".
Press on OK to terminate the application.

This also occures when stopping the NetWorker GUI from windows. We have
reinstalled the NetWorker client without success.

thanks

--
______V______   Ciprian Badescu
A L C A T E L   Mobile Networks Division R&D Center
Phone: +40 56 303100 (ext. 5786)
Fax: +40 56 295386
Email: Ciprian.Badescu AT alcatel DOT ro

On Tue, 25 Feb 2003, Thierry Faucille wrote:

> Date: Tue, 25 Feb 2003 09:20:29 +0100
> From: Thierry Faucille <tfnw AT stordata DOT fr>
> Reply-To: Thierry Faucille <Thierry.Faucille AT stordata DOT fr>
> To: NETWORKER AT listmail.temple DOT edu
> Subject: Re: [Networker] Windows Networker NDMP support
>
> For Ndmp under windows , you have to use the 6.2 version
>
> Be careful , you don't have any graphical interface for the files
> restore, only the command line (recover -c filer)
>
> The configuration and so are the same.
>
> The 24 Feb 2003 a 02:26:08 PM, Vikas Saini wrote:
> > Hi All,
> >
> >         Is there any difference wrt NDMP between Networker Solaris version 
> > and
> > Windows version. I have never used windows version so I was wondering if
> > there is anything which I need to take care of while doing NDMP backup and
> > restore or any configuration issue using networker windows version.
> >
> > thanks
> > Vikas
> >
> > --
> > Note: To sign off this list, send a "signoff networker" command via email
> > to listserv AT listmail.temple DOT edu or visit the list's Web site at
> > http://listmail.temple.edu/archives/networker.html where you can
> > also view and post messages to the list.
> > =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Thierry Faucille, technical support : tf AT stordata DOT fr
> Stordata, Versailles; France.
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>
  • [Networker] save.exe application error -> client timeout, Ciprian Badescu <=