Networker

Re: [Networker] Which interface?

2003-01-07 09:06:47
Subject: Re: [Networker] Which interface?
From: Terry Lemons <lemons_terry AT EMC DOT COM>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Tue, 7 Jan 2003 09:05:48 -0500
Hi

The name you used for one of your NetWorker Server interfaces (legato-dmz)
suggests to me that you are running in a firewall situation.  Is that true?
If so, I suspect that your firewall administrator may need to open the RPC
ports that NetWorker requires.  There have been several discussions about
this in this mailing list; you'll find them in the archive.  The RPC ports
are specified in the NetWorker Administrator Guide.

Hope this helps!
tl

Terry Lemons
 CLARiiON Applications Integration Engineering
        EMC²            
where information lives

4400 Computer Drive, MS D239
Westboro MA 01580
Phone: 508 898 7312
Email: Lemons_Terry AT emc DOT com



-----Original Message-----
From: Robert L. Harris [mailto:Robert.L.Harris AT RDLG DOT NET]
Sent: Monday, January 06, 2003 2:55 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] Which interface?


  I'm trying to get a couple clients working.  These clients need to use a
different interface than most.  The server has 2 interfaces:
legato(eth0) and legato-dmz(eth1).  The new servers need to use legato-dmz.

I've gone into my client config and added the legato-dmz to the option
for "Server network interface" however a "save -s legato-dmz" executed
on the client hangs.  If I strace the save.real process I can see it
waiting to get to the IP for legato.  All the resolution points to
legato-dmz, there's no crosses I can find.

Thoughts? 
 
  Legato 6.1.2 Build340



:wq!
---------------------------------------------------------------------------
Robert L. Harris                     | PGP Key ID: FC96D405
                               
DISCLAIMER:
      These are MY OPINIONS ALONE.  I speak for no-one else.
FYI:
 perl -e 'print $i=pack(c5,(41*2),sqrt(7056),(unpack(c,H)-2),oct(115),10);'

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>