[Networker] Problems cloning, tape block sizes, and can't find a solution.
2003-01-02 18:02:19
I can't get my cloning jobs to run reliably or correctly because I've
got a blocksize problem between my server and my storage node. Here's
the relevant info.
Configureation: Server & Storage Node w/ ADIC Scalar1000 (4 SDLT 220
drives)
Server Config:
Win2k SP3
Networker 6.2
Adaptec 29160 controller
2 of 4 SDLT 220 drives
Tape blocksize: 64KB
Storage Node Config:
RedHat 7.2
Networker 6.1.2
Adaptec 29160 controller
Tape blocksize: 128KB
Blocksize of tapes from my old DLT7000 stacker: 256KB
When cloning starts, the reading drive will disable once it uses a tape
that the storage node (128KB) wrote.
Is there a standard default block size for SDLT220?
Which blocksize should I be using, 64KB or 128KB?
I have tried following the procedure in the Knowledge Base for changing
tape blocksize on Win2k to make it 128KB across the board. The server
drives still report 64KB.
I have the latest and greatest SDLT drivers on the Win2k box.
Legato wants me to downgrade to SP2 at this point. Are there any
alternatives? I really can't downgrade, because I was never running SP2
in the first place.
I've checked the list archives, but all the reference docs are not
available.
Anyone?
Thanks,
Paul C.
--
Paul Crossman @ Wildfire Communications, Inc.
Senior Unix Systems Administrator
Phone & Fax: 781-778-3517
Email: pcrossma AT wildfire DOT com
--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [Networker] Problems cloning, tape block sizes, and can't find a solution.,
Paul Crossman <=
|
|
|