Networker

Re: [Networker] Tape Seperation

2003-01-02 14:33:13
Subject: Re: [Networker] Tape Seperation
From: George Sinclair <George.Sinclair AT NOAA DOT GOV>
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Date: Thu, 2 Jan 2003 14:40:50 -0500
You can set up two different pools, e.g. xxx and yyy. For xxx, you can
select one or more groups, where each group contains the desired
clients. Because groups cannot overlap pools, you'll have to come up
with different groups for yyy. Essentially, you can create similar
groups as you did for xxx, but they'll have to have different names and,
of course, their corresponding schedules will be fulls, not
incrementals. You then select the appropriate groups for the yyy pool as
you did for xxx. Finally, kake certain to set the schedules for the
various groups accordingly, enable both pools (very important) and
select the desired devices for the pools. Pools can share devices so you
would select the same devices for both pools. There should be no reason
to select levels as this should be taken care of by the group's
schedule. If you fail to enable the pools, the default pool will be
used.

Hope this helps.

George

"Eric J. Kropf" wrote:
>
> Greetings:
>
> Is it at all possible to seperate backups onto different tape groups?
> Here is an example...
>
> If I have a set of tapes labled xxx.001 - xxx.005 and another set lables
> yyy.001 - yyy.0005 in a 10 tape jukebox.
> I want to use the xxx tapes for incrementals, and the yyy tapes for
> fulls.
>
> Is this possible to set up so that networker uses the yyy tapes for
> fulls, and the xxx for incs?
>
> I am using:
> Neworker 6.1 Build 186 for Solaris 8
>
> Thanks,
> --
>       Eric J. Kropf - Systems Administrator
>             Engineous Software, Inc.
> 2000 CentreGreen Way, Suite 100, Cary, NC  27513
>     Ph. 919.677.6700 x.125 Fx. 919.677.1882
>
> --
> Note: To sign off this list, send a "signoff networker" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff networker" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

<Prev in Thread] Current Thread [Next in Thread>