Re: [Networker] Unable to save Tru64 client

Hi,

Be sure about name resolution from both side and no
firewalls are located between your Tru64 and the W2K Server.

Another good try could be to fill hosts files from both sides
using FQDN and short names. What's result of ...
from server : rpcinfo -p <client> 
from client : rpcinfo -p <server>

Try with FQDN, Short name and IP as Stan proposed you.

Have also a try to replace saveset=All but a list of FS
(/, /usr, /var, ...), I sometime saw the problem you
described when the hostname contained digits.

Another good troubleshooting step could be to launch
from the TRU64 Unix client 
        save -s <server> -l full -b <pool> /usr
to see if client initiated backups are working fine.
It could point you to DNS prob, what I think to be
the root cause of your problem.

Check also if the backup server is not DHCP enabled,
TRU64 unix not knowing anything about WINS.

There is also a patch that seems to match with your problem :
LGTpa44350 savegrp hangs on Windows NSR 6.1.x server for Tru64
6.1.2 client unix. You should contact Legato Support Folks for
getting more info and see if it matches with your case.

Hope that helps,

Thierry


Kind regards - Bien cordialement - Vriendelijke groeten,

Thierry FAIDHERBE

HPCI - Storage & Server Integration Practice 
Tru64 Unix and Legato EBS Consultant
                                   
 *********       *********   HEWLETT - PACKARD
 *******    h      *******   1 Rue de l'aeronef/Luchtschipstraat
 ******    h        ******   1140 Bruxelles/Brussel/Brussels
 *****    hhhh  pppp *****   
 *****   h  h  p  p  *****   100/102 Blv de la Woluwe/Woluwedal
 *****  h  h  pppp   *****   1200 Bruxelles/Brussel/Brussels
 ******      p      ******   BELGIUM
 *******    p      *******                              
 *********       *********   Phone :    +32 (0)2  / 729.85.42   
                             Mobile :   +32 (0)498/  94.60.85 
                             Fax :      +32 (0)2  / 729.88.30   
     I  N  V  E  N  T        Email :    thierry.faidherbe AT hp DOT com
                             Internet : http://www.hp.com/
________________________________________________________________________

MOBISTAR SA/NV 

SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2  / 745.75.81  
Avenue Jean Mermoz, 32          Fax :   +32 (0)2  / 745.89.56  
6041 GOSSELIES                  Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM                         Web :   http://www.mobistar.be/
________________________________________________________________________

  


-----Original Message-----
From: Stan Horwitz [mailto:stan AT TEMPLE DOT EDU] 
Sent: Wednesday, December 04, 2002 4:53 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Unable to save Tru64 client


On Wed, 4 Dec 2002, Terje Soreide wrote:

> The Client is running Tru64 v5.1A.  The Legato compatibility guide
confirms
> that this version is supported with Networker 6.1.2.

In that event, consider the possibility of a network misconfiguration on
the Tru64 Unix client.

Can you "rpcinfo -p" the client from the server and the server from the
client?

On the client, there should also be two instances of the nsrexecd
process
running at all times so if that's not the case, you need to check the
logs
on the client to try to find out why.

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=