I saw a similar issue on 6.1.1. Legato call no 3018173.

If the backup was run without building indexes , ie the pool setting was not 
build client indexes , when scanned back in it
will build indexes BUT when nsrim runs (every 24 hours) or an index cross check 
is run it wll be removed from the index
no matter what the current pool setting is.

Engineering are progressing a fix for the problem for a future release.

Kit

On 8 Nov 2002 at 12:28, O'Brien, Pat wrote:

> now that you have done the scan, you have to do something with nsrck to get
> the client indexes just right.  I would do the save set recover, but refine
> the save set recover to just the file you want.
>
> -----Original Message-----
> From: l-dovla [mailto:l-dovla AT ONLINE DOT NO]
> Sent: Friday, November 08, 2002 8:49 AM
> To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
> Subject: [Networker] Scanning of Offsite tapes (Offsite pools)!
>
>
> Hello!
>
> I am running Networker version 6.1.2 build 340 on W2K.
>
> I am trying to build an index for a large save set that was once sent to the
> Offsite pool. Index entries was turned off at the time.
>
> I have the SSID, but when I run scanner -I it refuses to put the entries in
> the index even if I turn this parameter on in the Offsite pool. I am running
> some tests on my disk system, and I see the same thing happen there.
>
> The command I run is:
> scanner -iv -S XXXXXX C:\file1
>
> The command runs fine, but it does not build any index on the file level, it
> just build the media index.
>
> Can anyone help me? I do not want to recover the whole saveset just for this
> one file(80 GB).
>
> Sincerely,
>
> Mike
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
> --
> Note: To sign off this list, send a "signoff" command via email
> to listserv AT listmail.temple DOT edu or visit the list's Web site at
> http://listmail.temple.edu/archives/networker.html where you can
> also view and post messages to the list.
> =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>



++++++++++++++++++++++++++++++++++++++++++++++++
Kit Cunningham - idata Limited
Mobile  +64 21 448 444   email: k.cunningham AT idata.co DOT nz
Support Calls to:  0800 backup -         0800 222 587
Support email: support AT idata.co DOT nz
http://www.idata.co.nz
++++++++++++++++++++++++++++++++++++++++++++++++

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=