You may have to specify the time of your last full to recover from.
If not, it recover the latest saveset (even an incr one).
PS : if you recover now, the recovered data will be appened to
the actual one, no problem for what has been added into your
client index files during the meantime on the new server.
Hope that helps,
Thierry
Kind regards - Bien cordialement - Vriendelijke groeten,
Thierry FAIDHERBE
Storage & Server Integration Practice
Tru64 Unix and Legato EBS Consultant
HEWLETT - PACKARD
Compaq Computers, a member of the new HP
********* ********* 1 Rue de l'aeronef/Luchtschipstraat
******* h ******* 1140 Bruxelles/Brussel/Brussels
****** h ******
***** hhhh pppp ***** Hewlett-Packard Belgium
***** h h p p ***** 100/102 Blv de la Woluwe/Woluwedal
***** h h pppp ***** 1200 Bruxelles/Brussel/Brussels
****** p ****** BELGIUM
******* p *******
********* ********* Phone : +32 (0)2 / 729.85.42
Mobile : +32 (0)498/ 94.60.85 ***
CHANGED ***
Fax : +32 (0)2 / 729.88.30
I N V E N T Email : thierry.faidherbe AT hp DOT com
Internet : http://www.hp.com/
________________________________________________________________________
_____
MOBISTAR SA/NV
SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2 / 745.75.81
Avenue Jean Mermoz, 32 Fax : +32 (0)2 / 745.89.56
6041 GOSSELIES Email : tfhaidhe AT mail.mobistar DOT be
BELGIUM Web : http://www.mobistar.be/
________________________________________________________________________
_____
-----Original Message-----
From: Paul Trepanier [mailto:pgt AT JAX DOT ORG]
Sent: Friday, August 23, 2002 9:52 PM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: Re: [Networker] Moving NetWorker from SUN to HP
Is it normal for the "nsrck -L7" operation to take ~5 minutes to restore
a single clients 30M index (happening to me now)? I've got 10G of
indexes which means it will take way too long...
Thanks
Paul Trepanier
Faidherbe, Thierry wrote:
>Matthew,
>
>If you lost index and media db, it's because :
>1) the media database has been restored under /var/nsr/mm. Move it back
>to
>/nsr/mm or to any other location being sure it's accessible from
/nsr/mm
>
>2) you should run "nsrck -l 7" to recover indexes from last tape.
>
>HTH,
>
>Thierry
>
>
>Kind regards - Bien cordialement - Vriendelijke groeten,
>
>Thierry FAIDHERBE
>
>Storage & Server Integration Practice
>Tru64 Unix and Legato EBS Consultant
>
> HEWLETT - PACKARD
> Compaq Computers, a member of the new HP
> ********* ********* 1 Rue de l'aeronef/Luchtschipstraat
> ******* h ******* 1140 Bruxelles/Brussel/Brussels
> ****** h ******
> ***** hhhh pppp ***** Hewlett-Packard Belgium
> ***** h h p p ***** 100/102 Blv de la Woluwe/Woluwedal
> ***** h h pppp ***** 1200 Bruxelles/Brussel/Brussels
> ****** p ****** BELGIUM
> ******* p *******
> ********* ********* Phone : +32 (0)2 / 729.85.42
> Mobile : +32 (0)498/ 94.60.85 ***
>CHANGED ***
> Fax : +32 (0)2 / 729.88.30
> I N V E N T Email : thierry.faidherbe AT hp DOT com
> Internet : http://www.hp.com/
>
>_______________________________________________________________________
_
>_____
>
>MOBISTAR SA/NV
>
>SYSTEM Team Charleroi, Mermoz 2 Phone : +32 (0)2 / 745.75.81
>Avenue Jean Mermoz, 32 Fax : +32 (0)2 / 745.89.56
>6041 GOSSELIES Email : tfhaidhe AT mail.mobistar DOT be
>BELGIUM Web : http://www.mobistar.be/
>_______________________________________________________________________
_
>_____
>
>
>
>-----Original Message-----
>From: Matthew Bourne [mailto:mbourne2001 AT LYCOS.CO DOT UK]
>Sent: Friday, August 23, 2002 5:11 PM
>To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
>Subject: Re: [Networker] Moving NetWorker from SUN to HP
>
>
>Hi JR,
>
>What a coincidence !!
>
>We have just migrated our NetWorker system from a Solaris server to an
>HPUX
>server.
>
>We had all sorts of fun & games with our tech support company before
>they
>finally managed to get a definitive statement from Legato which said
>that
>this operation was not supported. Great.
>
>The tech support guys, however, came up with the following:
>
>
>
>>Procedure
>>
>>* On your current server, create a test group and into it allocate all
>>clients.
>>* From the command line using a new tape if possible, create a final
>>bootstrap backup, with the syntax : savegrp -O [test group name] (O=
>>capital o not Zero)
>>* Make a note of the bootstrap ssid. If you are unsure of this, from
>>the command line run : mminfo -B and make a note of the newly created
>>bootstrap ssid, file and record number.
>>* Shutdown the NetWorker services on this machine.
>>* On your new HP server install Legato Networker to exactly the same
>>path as is on the Solaris server, ensure a single drive is available
>>
>>
>for
>
>
>>use. This must be the same as on the Solaris server.
>>* Start the services on the HP server.
>>* Place the final bootstrap backup manually into the device created.
>>* From the command line run, and answer the questions with the
>>appropriate responses : mmrecov
>>* Once completed, stop the NetWorker services.
>>* In the /nsr directory, move the res directory to res.old, index to
>>index.old and mm to mm.old.
>>* In the /nsr directory move the res.R to res.
>>* Please note on bringing up NetWorker you will have no volumes
>>registered in your media database or savesets in your index's tab.
>>* Delete the Jukebox that is currently on your system, as this will be
>>using the SCSI address from your Solaris server.
>>* Recreate the jukebox using : jbconfig
>>* Can you please print / save to file all of your registration
>>information and send this through to me so that I can get you some new
>>authorisation codes for your new server.
>>
>>>From here you will need to run a test backup's of your clients to
>>
>>
>ensure
>
>
>>that the clients can see your new server.
>>
>>>From this point on your new server will contain all backup's from this
>>point onwards. If you need to recover historic data you will have to
>>disable the HP server and then bring up the Solaris server and run any
>>recoveries from here.
>>
>>
>
>The most important point in all this is the paths *MUST* be the same.
>
>If your /nsr directory is a symlink to filesystem /flibble on the
>Solaris
>box, you will need to create a filesystem /flibble on your HP box and
>re-
>create the links. MMINFO really is that fussy.
>
>This procedure effectively migrates your resources file - i.e. all your
>clients, schedules, etc.
>
>IT DOES NOT MIGRATE THE MEDIA DBASE OR CLIENT INDEXES !!
>
>Good luck.
>
>M.
>
>--
>Note: To sign off this list, send a "signoff" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>--
>Note: To sign off this list, send a "signoff" command via email
>to listserv AT listmail.temple DOT edu or visit the list's Web site at
>http://listmail.temple.edu/archives/networker.html where you can
>also view and post messages to the list.
>=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
>
>
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=
|
