Re: [Networker] recovery for terminal server

As far as I remember when I did it (and as far as I remember)
You should pay attention to 2 things:

1. When I restored files from the backup, ntuser.dat is restored 
in %systemroot%\profiles\<current_user>\windows\profiles\<user>, 
and we found workaround for that, we just copy files back to 
%systemroot%\profiles. And when we do that, we copy ntuser.dat 
too, and all settings are back, at least in my case.

2. We noticed that when we restored Metaframe it "see" that, for 
example, M:\ and N:\ are used, and automatically O:\ and P:\ are 
assigned.   We tried to restore Metaframe again, and we get next 
few letters for drive names. Solution for this problem is that we 
disconnect the assigned network drive names, and that we map old ones. 
Maybe the easiest way to do this is from the Windows NT Explorer, 
menu Tools -> Disconnect Network Drive (we select drive we want 
to disconnect), and then Tools -> Map Network Drive. We must 
do this from the client (where we see network drives). 

There could be more, but in my case this was enough.  Perhaps
someone else can give You (and us) more details regarding his/her
experience.

Cheers,
Hrvoje Crvelin
Orchestra Service GmbH


-----Original Message-----
From: Legato NetWorker discussion [mailto:NETWORKER AT LISTMAIL.TEMPLE DOT EDU]
On Behalf Of Sharon Sampson
Sent: Thursday, August 08, 2002 1:44 AM
To: NETWORKER AT LISTMAIL.TEMPLE DOT EDU
Subject: [Networker] recovery for terminal server


does anyone have info regarding this?

 Legato backup and recover process/procedure (anything) with Microsoft
Terminal Server for NT 4.0.


Thanks in advance!

Sharon Sampson
ssampson AT valleywater DOT org

--
Note: To sign off this list, send a "signoff" command via email to
listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can also
view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=

--
Note: To sign off this list, send a "signoff" command via email
to listserv AT listmail.temple DOT edu or visit the list's Web site at
http://listmail.temple.edu/archives/networker.html where you can
also view and post messages to the list.
=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=