Re: [ADSM-L] Datamover on Library Manager Library Client
2012-01-11 10:42:32
Hi
Since you also have to define paths for the datamover, dont you have to define
it to the library manager (which usually controls all the drive paths and the
mounts in the library) ?
When you asked about library manager / library client I'm assuming you're in a
multi-TSM server environment with 1 TSM library manager and one or multiple TSM
library clients (the NAS appliance defined as a datamover with drive paths
could also been seen as a library client).
Best Regards
Daniel Sparrman
Daniel Sparrman
Exist i Stockholm AB
Växel: 08-754 98 00
Fax: 08-754 97 30
daniel.sparrman AT exist DOT se
http://www.existgruppen.se
Posthusgatan 1 761 30 NORRTÄLJE
-----"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU> skrev: -----
Till: ADSM-L AT VM.MARIST DOT EDU
Från: George Huebschman
Sänt av: "ADSM: Dist Stor Manager"
Datum: 01/11/2012 16:11
Ärende: Re: [ADSM-L] Datamover on Library Manager Library Client
You can do that on the Library Client.
On Wed, Jan 11, 2012 at 10:01 AM, Meuleman, Ruud <
ruud.meuleman AT tatasteel DOT com> wrote:
> Hi,
>
> We are going to configure datamover for backup with ndmp. Where do I
> have to define the datamover? TSM Library Manager or TSM Library Client?
>
> Kind Regards,
> Ruud Meuleman
>
> **********************************************************************
>
>
> This transmission is confidential and must not be used or disclosed by
> anyone other than the intended recipient. Neither Tata Steel Europe Limited
> nor any of its subsidiaries can accept any responsibility for any use or
> misuse of the transmission by anyone.
>
> For address and company registration details of certain entities within
> the Tata Steel Europe group of companies, please visit
> http://www.tatasteeleurope.com/entities
>
>
> **********************************************************************
>
|
|
|