Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run
2011-11-17 10:24:08
Thanks again Harold
I don't see that 1501 listening
C:\>NETSTAT -A -N
Active Connections
Proto Local Address Foreign Address State
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1581 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2103 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2105 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2107 0.0.0.0:0 LISTENING
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING
TCP 0.0.0.0:5250 0.0.0.0:0 LISTENING
TCP 0.0.0.0:32843 0.0.0.0:0 LISTENING
TCP 0.0.0.0:32844 0.0.0.0:0 LISTENING
TCP 0.0.0.0:42510 0.0.0.0:0 LISTENING
TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49168 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49183 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49190 0.0.0.0:0 LISTENING
TCP 0.0.0.0:49192 0.0.0.0:0 LISTENING
TCP 0.0.0.0:53201 0.0.0.0:0 LISTENING
TCP [::]:80 [::]:0 LISTENING
TCP [::]:135 [::]:0 LISTENING
TCP [::]:445 [::]:0 LISTENING
TCP [::]:2103 [::]:0 LISTENING
TCP [::]:2105 [::]:0 LISTENING
TCP [::]:2107 [::]:0 LISTENING
TCP [::]:3389 [::]:0 LISTENING
TCP [::]:32843 [::]:0 LISTENING
TCP [::]:32844 [::]:0 LISTENING
TCP [::]:42510 [::]:0 LISTENING
TCP [::]:47001 [::]:0 LISTENING
TCP [::]:49152 [::]:0 LISTENING
TCP [::]:49153 [::]:0 LISTENING
TCP [::]:49154 [::]:0 LISTENING
TCP [::]:49168 [::]:0 LISTENING
TCP [::]:49183 [::]:0 LISTENING
TCP [::]:49190 [::]:0 LISTENING
TCP [::]:49192 [::]:0 LISTENING
TCP [::1]:1801 [::]:0 LISTENING
Best regards
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Vandeventer, Harold [BS]
Sent: Wednesday, November 16, 2011 3:30 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Windows 2008 client ..TSM schedule won't run
On the node side, open a command prompt and issue NETSTAT -A -N
Do you see the port number listening? The TSM default is 1501, I believe.
In my case: 'TCP 0.0.0.0:1501 0.0.0.0:0 LISTENING' is displayed.
If the port is listening and you can't TELNET to it (assuming you have TELNET
allowed through your network), it's most likely the firewall IS blocking the
traffic.
If not, stop/start the scheduler service as David recommends.
Like others, we've been round-n-round this issue with firewall managers saying
"we never change" only to find they did.
------------------------------------------------
Harold Vandeventer
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Ehresman,David E.
Sent: Wednesday, November 16, 2011 1:46 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run
Then Harold has the right answer. If you can telnet from the tsm server to the
client at the port the listener is suppose to be using, than it is not a
firewall problem. If the telnet attempt times out, either the cad (or
scheduler) is not running, it is using a different port (see the cad startup
messages in dsmwebcl.log), or there is a firewall/network issue blocking access.
David
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Hughes, Timothy
Sent: Wednesday, November 16, 2011 2:23 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run
Hi Wanda
We use prompted mode
Thanks
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Prather, Wanda
Sent: Wednesday, November 16, 2011 11:55 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Windows 2008 client ..TSM schedule won't run
Are you running in polling (the default) or prompted mode?
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Hughes, Timothy
Sent: Wednesday, November 16, 2011 11:24 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Windows 2008 client ..TSM schedule won't run
Hi,
We have 4 windows 2008 that are missing consistently the TSM scheduler is set
to start however the backups don't run.
f.y.i - We had this issue about 5 months ago and the admin set the UAC to the
lowest settings and turned the firewall off and the backups worked until
recently. The admin says the firewall is turned off and the settings are the
same.
Anyone else have or have had this issue?
Windows 2008 64 bit R2 servers
Tivoli clients 6.2.2.2
Thanks for any help/advice in advance!
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- [ADSM-L] Windows 2008 client ..TSM schedule won't run, Hughes, Timothy
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Prather, Wanda
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Yudi Darmadi
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Hughes, Timothy
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Vandeventer, Harold [BS]
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run,
Hughes, Timothy <=
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Vandeventer, Harold [BS]
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Hughes, Timothy
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Vandeventer, Harold [BS]
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Hughes, Timothy
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Vandeventer, Harold [BS]
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Hughes, Timothy
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Richard Sims
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Hughes, Timothy
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Richard Sims
- Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run, Hughes, Timothy
|
|
|