Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run
2011-11-16 16:06:22
Hi Timothy,
If the TCP port is listenning (client side), and telneting to this port is
impossible, the firewall is propably the root cause of the problem (considering
other network considerations are ok).
--
Best regards / Cordialement / مع تحياتي
Erwann SIMON
-----Original Message-----
From: "Hughes, Timothy" <Timothy.Hughes AT OIT.STATE.NJ DOT US>
Sender: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
Date: Wed, 16 Nov 2011 14:24:12
To: <ADSM-L AT VM.MARIST DOT EDU>
Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
Subject: Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run
Harold
No Telneting the port does not work
Thanks
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Vandeventer, Harold [BS]
Sent: Wednesday, November 16, 2011 11:43 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Windows 2008 client ..TSM schedule won't run
From the TSM server, does a TELNET <nodeIP> <listeningPort> work?
If not, I'd suspect the node isn't listening or the firewall is in the way.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Hughes, Timothy
Sent: Wednesday, November 16, 2011 10:24 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Windows 2008 client ..TSM schedule won't run
Hi,
We have 4 windows 2008 that are missing consistently the TSM scheduler is set
to start however the backups don't run.
f.y.i - We had this issue about 5 months ago and the admin set the UAC to the
lowest settings and turned the firewall off and the backups worked until
recently. The admin says the firewall is turned off and the settings are the
same.
Anyone else have or have had this issue?
Windows 2008 64 bit R2 servers
Tivoli clients 6.2.2.2
Thanks for any help/advice in advance!
|
|
|