Gents, the -optfile= option works very well In Linux if you're wanting
to keep a consistent way of starting dsmc across platforms. It works
well on every platform I support, AIX, Linux and Windows.
1st. as Remco said, create a new stanza in the dsm.sys file.
2nd. Create a new dsm.opt file with one line "Servername NODENAME"
3rd. run "dsmc -optfile=dsm.new.opt" or just use "-se=NODENAME"
I use the -optfile option in my scripts, because it works well with the
CAD and scheduler services, and you can add extra options or temp
options in there as well.
i.e.: dsmcad -optfile=/opt/Tivoli/tsm/client/config/dsm.special.opt
See Ya'
Howard Coles Jr.
John 3:16!
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Tim Brown
Sent: Tuesday, November 08, 2011 4:01 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] dsmc in linux
Thanks !!!
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Remco Post
Sent: Tuesday, November 08, 2011 4:13 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: dsmc in linux
Hi,
you have two options:
1- add an extra server stanza to dsm.sys, then run dsmc -se=newserver,
or create an extra dsm.opt and set DSM_CONFIG to point to that dsm.opt
2- create an alternate dsm dircetory containing the dsm.sys, dsm.opt and
a link to the languages and set DSM_DIR
I think you're looking for option 1
On 8 nov. 2011, at 22:01, Tim Brown wrote:
> Is there an override in the linux backup command to access a different
dsm.sys
>
> As there is in windows
>
>
>
> Windows
>
> Dsmc inc -optile=dsm1.opt
>
>
>
>
>
> Linux
>
>
>
> ./ dsmc inc -????=dsm1.sys
>
>
>
> Thanks,
>
>
>
> Tim Brown
> Systems Specialist - Project Leader
> Central Hudson Gas & Electric
> 284 South Ave
> Poughkeepsie, NY 12601
> Email: tbrown AT cenhud DOT com <<mailto:tbrown AT cenhud DOT com>>
> Phone: 845-486-5643
> Fax: 845-486-5921
> Cell: 845-235-4255
>
>
>
>
> This message contains confidential information and is only for the
intended recipient. If the reader of this message is not the intended
recipient, or an employee or agent responsible for delivering this
message to the intended recipient, please notify the sender immediately
by replying to this note and deleting all copies and attachments.
--
Met vriendelijke groeten/Kind Regards,
Remco Post
r.post AT plcs DOT nl
+31 6 248 21 622
DISCLAIMER: This communication, along with any documents, files or attachments,
is intended only for the use of the addressee and may contain legally
privileged and confidential information. If you are not the intended recipient,
you are hereby notified that any dissemination, distribution or copying of any
information contained in or attached to this communication is strictly
prohibited. If you have received this message in error, please notify the
sender immediately and destroy the original communication and its attachments
without reading, printing or saving in any manner. Please consider the
environment before printing this e-mail.
|
