Just to be sure, can you verify you have the EE license applied?

With friendly Regards,
Josh-Daniel S. Davis


On Fri, Mar 4, 2011 at 9:32 AM, Laks, Brian <Blaks AT healthplan DOT com> wrote:
> I have 9 LTO-4 drives connected to our TSM server, only 5 of them work at any 
> time after upgrading to a new fiber card.
>
> We have tried two different fiber cards (qlogic and emulex) and still only 5 
> drives.
>
> We have Confirmed latest drivers and firmware with IBM support.  The old 2gig 
> fiber card still works with all 9 drives, but is considerably slower than 5 
> drives on an 4g card.
>
> The new cards are both multi port cards, but only one port is being used. 
>  Multipath drivers are not being used.  9 drives are zoned to one port.
>
> IBM support believes it to be hardware since the old card works, so we 
> purchased a second card of different manufacture.  Now the problem exists on 
> two fiber cards of different manufacture so I'm real reluctant to think its a 
> hardware problem any more.
>
> Interestingly, the 5 good drives vary.  I can unload the drivers and reload 
> everything and drives that were previously unavailable work while drives that 
> were working are then unavailable.  It seems kind of random.  All the dives 
> show up in the OS, and TSMDLST show them all as well.  I uninstalled old 
> drivers and reinstalled them exactly as per IBM support instructions, and 
> rebuilt the drive and library paths in tsm during each reload as per IBM 
> support guidelines.
>
> Has anyone seen anything like this?  I'm absolutely baffled.  I'm thinking we 
> are going to have to zone 5 drives to one port and 4 drives to the other, but 
> the SAN admin type is reluctant since all 9 drives work with the original 
> card.  My guess is that somewhere in the drivers its smart enough to know 
> that 9 LTO-4's to a single 4g port is silly in the first place.
>
> Maybe someone wants 4 LTO-4's so this problem just goes away :)  The 5 drives 
> work with fewer problems and better throughput than the 9 drives on the old 
> card.
>
> Thanks for reading, Have a great day.
>
> _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
> CONFIDENTIALITY NOTICE: If you have received this email in error, please 
> immediately notify the sender by e-mail at the address shown.This email 
> transmission may contain confidential information.This information is 
> intended only for the use of the individual(s) or entity to whom it is 
> intended even if addressed incorrectly. Please delete it from your files if 
> you are not the intended recipient. Thank you for your compliance.
>