ADSM-L

[ADSM-L] SV: TSM 6.1.3 Install

2010-01-14 01:15:19
Subject: [ADSM-L] SV: TSM 6.1.3 Install
From: Christian Svensson <Christian.Svensson AT CRISTIE DOT SE>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 14 Jan 2010 06:10:24 +0100
Hi Sam,
I have successful run a couple of upgrades from 6.1.0.0 to 6.1.3 and also from 
6.1.2.1 to 6.1.3.
But I have only been upgrading on Linux Servers and not AIX.

Best Regards
Christian Svensson

Cell: +46-70-325 1577
E-mail: Christian.Svensson AT cristie DOT se
Skype: cristie.christian.svensson
Supported Platform for CPU2TSM:: 
http://www.cristie.se/cpu2tsm-supported-platforms

________________________________________
Från: ADSM: Dist Stor Manager [ADSM-L AT VM.MARIST DOT EDU] f&#246;r Sam 
Sheppard [SHS AT SDDPC.SANNET DOT GOV]
Skickat: den 13 januari 2010 22:54
Till: ADSM-L AT VM.MARIST DOT EDU
Ämne: TSM 6.1.3 Install

We have been running TSM server 6.1.2.1 on AIX 6.1 for a couple of
months and needed to upgrade to 6.1.3 for the fix for a severe NDMP/TOC
performance problem.

Downloaded the 6.1.3 package, ran the upgrade procedure and lo and
behold, the performance problem was no better. At that time, I also
discovered that we were still running version 6.1.2.1 as shown by both
logging in with DSMADMC and the output of the Q STATUS command.

At this point, I opened a problem with Tivoli support. They requested I
rerun the upgrade and send them screen shots and logs of the process as
well as a checksum output of the downloaded package. Again, all looked
normal except that this time it ran much quicker and I received a
message indicating DB2 9.5 had already been installed and would not be
re-installed. And, again, the version ended up being 6.1.2.1.

Two weeks ago, the problem was forwarded to a different support group
who looked at it until Monday when I received a message saying they had
decided the best way to get 6.1.3 installed at this point was to run the
./Uninstall_Tivoli_Storage_Manager program from the /opt/tivoli/tsm/_uninst
directory and then run the upgrade again.  Did that today with the same
results with the additional problem of now having no B/A client on the
machine and no DSMADMC.

My question is; has anyone successfully installed 6.1.3?  Does the
output from a Q STATUS command show 6.1.3?

Thanks
Sam Sheppard
San Diego Data Processing Corp.
(858)-581-9668

<Prev in Thread] Current Thread [Next in Thread>