We are running VSS based backups (SYSTEMSTATE, etc). Quite often there are VSS
problems during backups. We are installing VSS patches, but VSS is still a
source of problems.
TSM Client gives normal completion in this case and event is mensioned as
successfull. I have found only one way to report problems with VSS - check
number of backed up bytes. Usually it is 0 after VSS problem. Checking event
status and number of backed up files gives better results in my opinion.
________________________________________
From: ADSM: Dist Stor Manager [ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Huebschman, George J. [GJHuebschman AT LMUS.LEGGMASON DOT COM]
Sent: Thursday, October 15, 2009 4:46 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Querying status of a finished process
Be aware that both the summary table and Event log can show false
success for scheduled backups.
I have had experience with the summary table showing success for backups
where the actlog shows failure. IBM tells me that it is working as
designed.
I have not had experience with false success in the Event log, but Wanda
tells me that it is so and I believe her.
Richard Sims is correct, though. The things you find in the server tell
you about definite problems. Much of what the server knows about client
activity is based on what the Client reports back. The Client does not
fail backups just because files fail. Where I am going with this is,
that if you want to look at a report on the server of Missed/Failed,
look deeper. If something Misses or Fails, you know you have a problem.
But, just because you have successful backups, does not me there is no
problem.
You can query the actlog as follows and get information like this, which
comes from the Client. Even that will not identify many of the things
Richard mentioned. If you have excluded a directory or domain, the
Client will smilingly report success.
tsm: AIXPROD65>server1xyz: q act node=ClientServerXYZ begind=-2
ANR1699I Resolved server1xyz to 1 server(s) - issuing command Q ACT
NODE=ClientServerXYZ BEGIND=-2 against server(s).
ANR1687I Output for command 'Q ACT NODE=ClientServerXYZ BEGIND=-2 '
issued against server server1xyz follows:
Date/Time Message
--------------------
----------------------------------------------------------
10/13/2009 09:26:17 ANE4005E (Session: 2495820, Node:
ClientServerXYZ) Error
processing
'\\somefiler\somedept\Users\someuser\ABC_9.2.0 -
Serusaem
NainocarD\ABC\CMA\CYA\stardotext_someuser_20034-
.xls': file not found
10/13/2009 11:06:32 ANE4952I (Session: 2491225, Node:
ClientServerXYZ) Total
number of objects inspected: 8,690,541
(SESSION: 2491225)
10/13/2009 11:06:32 ANE4954I (Session: 2491225, Node:
ClientServerXYZ) Total
number of objects backed up: 14,904
(SESSION: 2491225)
10/13/2009 11:06:32 ANE4958I (Session: 2491225, Node:
ClientServerXYZ) Total
number of objects updated: 0
(SESSION: 2491225)
10/13/2009 11:06:32 ANE4960I (Session: 2491225, Node:
ClientServerXYZ) Total
number of objects rebound: 0
(SESSION: 2491225)
10/13/2009 11:06:32 ANE4957I (Session: 2491225, Node:
ClientServerXYZ) Total
number of objects deleted: 0
(SESSION: 2491225)
10/13/2009 11:06:32 ANE4970I (Session: 2491225, Node:
ClientServerXYZ) Total
number of objects expired: 1,936
(SESSION: 2491225)
10/13/2009 11:06:32 ANE4959I (Session: 2491225, Node:
ClientServerXYZ) Total
number of objects failed: 4
(SESSION: 2491225)
10/13/2009 11:06:32 ANE4965I (Session: 2491225, Node:
ClientServerXYZ) Total
number of subfile objects: 0
(SESSION: 2491225)
10/13/2009 11:06:32 ANE4961I (Session: 2491225, Node:
ClientServerXYZ) Total
number of bytes transferred: 40.36 GB
(SESSION: 2491225)
10/13/2009 11:06:32 ANE4963I (Session: 2491225, Node:
ClientServerXYZ) Data
transfer time: 711.79 sec
(SESSION:
2491225)
10/13/2009 11:06:32 ANE4966I (Session: 2491225, Node:
ClientServerXYZ) Network
data transfer rate: 59,465.00 KB/sec
(SESSION:
2491225)
10/13/2009 11:06:32 ANE4967I (Session: 2491225, Node:
ClientServerXYZ) Aggregate
data transfer rate: 725.91 KB/sec
(SESSION:
2491225)
10/13/2009 11:06:32 ANE4968I (Session: 2491225, Node:
ClientServerXYZ) Objects
compressed by: 0% (SESSION:
2491225)
10/13/2009 11:06:32 ANE4969I (Session: 2491225, Node:
ClientServerXYZ) Subfile
objects reduced by: 0% (SESSION:
2491225)
10/13/2009 11:06:32 ANE4964I (Session: 2491225, Node:
ClientServerXYZ) Elapsed
processing time: 16:11:47 (SESSION:
2491225)
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Tribe
Sent: Wednesday, October 14, 2009 8:56 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Querying status of a finished process
Hello,
I'm a beginner with TSM and this question might be very basic. However,
I wasn't able to find the answer in the documentation, so here's my
question:
I'm using TSM 5.5 and want to run all commands through the dsmadmc
command line. I'm backing up and restoring NAS nodes.
I found ways to start backups and query running processes (query process
<ID>), but I don't know how to query the status of finished processes. I
just want a simple way to figure out if a backup / restore was
successful. If I use the "query process <ID>" after the job finished, it
just tells me "Process cannot be found".
There must be a simple way to do that, right? I know that I can query
the actlog, but is there a better / easier way to do this, given a
process id?
Thanks,
Jan
+----------------------------------------------------------------------
|This was sent by mail AT janseidel DOT net via Backup Central.
|Forward SPAM to abuse AT backupcentral DOT com.
+----------------------------------------------------------------------
IMPORTANT: E-mail sent through the Internet is not secure. Legg Mason
therefore recommends that you do not send any confidential or sensitive
information to us via electronic mail, including social security numbers,
account numbers, or personal identification numbers. Delivery, and or timely
delivery of Internet mail is not guaranteed. Legg Mason therefore recommends
that you do not send time sensitive
or action-oriented messages to us via electronic mail.
This message is intended for the addressee only and may contain privileged or
confidential information. Unless you are the intended recipient, you may not
use, copy or disclose to anyone any information contained in this message. If
you have received this message in error, please notify the author by replying
to this message and then kindly delete the message. Thank you.
Please consider the environment before printing this Email.
"This email message and any attachments transmitted with it may contain
confidential and proprietary information, intended only for the named
recipient(s). If you have received this message in error, or if you are not the
named recipient(s), please delete this email after notifying the sender
immediately. BKME cannot guarantee the integrity of this communication and
accepts no liability for any damage caused by this email or its attachments due
to viruses, any other defects, interception or unauthorized modification. The
information, views, opinions and comments of this message are those of the
individual and not necessarily endorsed by BKME."
|
