Hey Matthew,
Thanks for the extracts below; they both look good. By command line, I
meant the administrative command line dsmadmc; you can logon to it using
a TSM account with system privileges and run the "RESTORE NODE" command
(run a help restore node from the dsmadmc window for more info). You
made use of virtual file space mappings during the NDMP backup; the
restore command will look like "RESTORE NODE NETAPP_NODE
SOURCE_VIRTUALFSMAP DESTINATION_VIRTUALFSMAP wait=yes"
>>> The user actually wants to restore the data of a normal node to a
space on this NetApp filer; I'm guessing this isn't impossible? <<<
Yes you can restore the data of a normal node (using your regular
baclient) to a space on this NetApp filer; one way to do this is to make
use of cifs shares and perform the restore to the cifs share (you have
to make sure the account you use to perform the restore has write
privileges to the cifs share) location under "restore to Following
Location in baclient restore GUI" (\\NETAPP_FILER\VOLUME_NAME\CIFS_SHARE
for instance)
Good luck.
BERTAUT TCHUISE
Storage Support Administrator
Legg Mason Technology Services
*410-580-7032
BTchuise AT leggmason DOT com
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Matthew Large
Sent: Wednesday, August 12, 2009 9:07 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] NetApp restore 'This node cannot be selected'
Hi Bertaut,
Node Name: EXONP003
Platform: NetApp
Client OS Level: NetApp Release 7.2.4 (Network Appliance)
Client Version:
Policy Domain Name: SWINAS
Last Access Date/Time: 08/11/2009 23:00:27
Days Since Last Access: 1
Password Set Date/Time: 02/13/2006 14:14:01
Days Since Password Set: 1,276
Invalid Sign-on Count: 0
Locked?: No
Contact:
Compression:
Archive Delete Allowed?: Yes
Backup Delete Allowed?: No
Registration Date/Time: 02/13/2006 14:14:01
Registering Administrator: JOHNW
Last Communication Method Used: NDMP
Bytes Received Last Session:
Bytes Sent Last Session:
Duration of Last Session:
Pct. Idle Wait Last Session:
Pct. Comm. Wait Last Session:
Pct. Media Wait Last Session:
Optionset:
URL:
Node Type: NAS
Password Expiration Period:
Keep Mount Point?: No
Maximum Mount Points Allowed: 1
Auto Filespace Rename : No
Validate Protocol: No
TCP/IP Name: GBCWWARLA016
TCP/IP Address: 148.185.119.163
Globally Unique ID:
7d.c6.4d.50.3d.56.11.d9.86.c8.00.0f.1f.a1.60.28
Transaction Group Max: 0
Data Write Path: ANY
Data Read Path: ANY
Session Initiation: ClientOrServer
High-level Address:
Low-level Address:
Collocation Group Name:
Proxynode Target:
Proxynode Agent:
Node Groups:
Email Address:
Data Mover Name: EXONP003
Data Mover Type: NAS
IP Address: exonp003-bk
TCP/IP Port Number: 10000
User Name: root
Storage Pool Data Format: NetApp Dump
On-Line: Yes
Last Update by (administrator): JOHNW
Last Update Date/Time: 02/13/2006 14:31:38
According to this page
http://www.redbooks.ibm.com/abstracts/tips0399.html?Open
the NDMP functionality is not available from the standard BA client
apps. If it _is_ available, how do I start the dsmc client and force it
ask me for the password? PASSWORDACCESS GENERATE is already set in
dsm.opt.
Much appreciated,
Matthew
On Wed, Aug 12, 2009 at 1:12 PM, Tchuise, Bertaut <
BTchuise AT lmus.leggmason DOT com> wrote:
> Matthew,
>
> I never came across this error message during NDMP backups. What do
> your "q node NETAPPFILER_NAME_DEFINED_IN_TSM type=nas f=d" and "q
> datamover NETAPPFILER_NAME_DEFINED_IN_TSM type=nas f=d" look like?
>
> Rather than using the web GUI, have you tried using the command line
> using a TSM account with system privileges? The command line is much
> faster anyways and allows you to perform both file-level and image
> level restore.
>
> Good luck.
>
> BERTAUT TCHUISE
> Storage Support Administrator
> Legg Mason Technology Services
> *410-580-7032
> BTchuise AT leggmason DOT com
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of Matthew Large
> Sent: Wednesday, August 12, 2009 7:54 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] NetApp restore 'This node cannot be selected'
>
> No problem Grigori,
>
> There must be someone here who knows..
>
> To follow on, I am able to select the NetApp nodes in the Backup
> WebGUI, just not in the Restore window.
> The user actually wants to restore the data of a normal node to a
> space on this NetApp filer; I'm guessing this isn't impossible?
>
> Cheers,
> Matthew
> On Wed, Aug 12, 2009 at 12:39 PM, Grigori Solonovitch <
> G.Solonovitch AT bkme DOT com> wrote:
>
> > I am very sorry, but I could not help you with NDMP nodes (no
> experience).
> >
> > Grigori G. Solonovitch
> >
> > Senior Technical Architect
> >
> > Information Technology Bank of Kuwait and Middle East
> > http://www.bkme.com
> >
> > Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail:
> > G.Solonovitch AT bkme DOT com
> >
> > Pease consider the environment before printing this Email
> >
> >
> > -----Original Message-----
> > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
> > Behalf Of Matthew Large
> > Sent: Wednesday, August 12, 2009 2:37 PM
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: Re: [ADSM-L] NetApp restore 'This node cannot be selected'
> >
> > I'm confused.
> >
> > How do you specify the NDMP node in the SET ACCESS statement on the
> > node if the NDMP server is not defined as a node, but a DATAMOVER?
> >
> > Are there any detailed docs out there describing this activity?
> > I can't get to Redbooks right now.
> >
> > Best,
> > Matthew
> >
> > On Wed, Aug 12, 2009 at 11:52 AM, Grigori Solonovitch <
> > G.Solonovitch AT bkme DOT com> wrote:
> >
> > > If you are accessing local node, I have no more ideas. But, if you
> > > are trying to access another nodes, you need to grant access by
> > > "set
>
> > > access
> > ..."
> > > command from source node in dsmc.
> > >
> > > Grigori G. Solonovitch
> > >
> > > Senior Technical Architect
> > >
> > > Information Technology Bank of Kuwait and Middle East
> > > http://www.bkme.com
> > >
> > > Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail:
> > > G.Solonovitch AT bkme DOT com
> > >
> > > Please consider the environment before printing this Email
> > >
> > >
> > > -----Original Message-----
> > > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
> > > Behalf Of Matthew Large
> > > Sent: Wednesday, August 12, 2009 1:48 PM
> > > To: ADSM-L AT VM.MARIST DOT EDU
> > > Subject: Re: [ADSM-L] NetApp restore 'This node cannot be
selected'
> > >
> > > Thanks for responding Grigori,
> > >
> > > Indeed - the admin ID has full system privileges.
> > >
> > > Anything else I can check?
> > >
> > > On Wed, Aug 12, 2009 at 11:22 AM, Grigori Solonovitch <
> > > G.Solonovitch AT bkme DOT com> wrote:
> > >
> > > > Please check access level for user, which is used in GUI
> > > > user/password
> > > by:
> > > > q user <user ID> f=d
> > > > This user should have "Client Access Privilege" on current host
> > > > or
> > > "System
> > > > Privilege".
> > > >
> > > > Grigori G. Solonovitch
> > > >
> > > > Senior Technical Architect
> > > >
> > > > Information Technology Bank of Kuwait and Middle East
> > > > http://www.bkme.com
> > > >
> > > > Phone: (+965) 2231-2274 Mobile: (+965) 99798073 E-Mail:
> > > > G.Solonovitch AT bkme DOT com
> > > >
> > > > Please consider the environment before printing this Email
> > > >
> > > >
> > > > -----Original Message-----
> > > > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
> > > > Behalf
> > Of
> > > > Matthew Large
> > > > Sent: Wednesday, August 12, 2009 1:15 PM
> > > > To: ADSM-L AT VM.MARIST DOT EDU
> > > > Subject: [ADSM-L] NetApp restore 'This node cannot be selected'
> > > >
> > > > Hi,
> > > >
> > > > I've not used enough of these to know where the problem might
> > > > be, but
> > > when
> > > > I
> > > > open the WebGUI window with the address
> > > >
> > > > http://localhost:1581
> > > >
> > > > click Restore and enter the admin user/pwd, I see the NetApp
> > > > servers in
> > > the
> > > > file view window.
> > > >
> > > > What is causing the message 'This node cannot be selected' when
> > > > I
> > attempt
> > > > to
> > > > select either the entire node or the File Level tick box?
> > > >
> > > > I can't find any documentation about it or why it might appear.
> > > > Any info hugely appreciated.
> > > >
> > > > Many thanks,
> > > > Matthew
> > > >
> > > > Please consider the environment before printing this Email.
> > > >
> > > > "This email message and any attachments transmitted with it may
> > > > contain confidential and proprietary information, intended only
> > > > for the named recipient(s). If you have received this message in
> > > > error, or if you are
> > > not
> > > > the named recipient(s), please delete this email after notifying
> > > > the
> > > sender
> > > > immediately. BKME cannot guarantee the integrity of this
> > > > communication
> > > and
> > > > accepts no liability for any damage caused by this email or its
> > > attachments
> > > > due to viruses, any other defects, interception or unauthorized
> > > > modification. The information, views, opinions and comments of
> > > > this
> > > message
> > > > are those of the individual and not necessarily endorsed by
BKME."
> > > >
> > >
> > > "This email message and any attachments transmitted with it may
> > > contain confidential and proprietary information, intended only
> > > for the named recipient(s). If you have received this message in
> > > error, or if you are
> > not
> > > the named recipient(s), please delete this email after notifying
> > > the
> > sender
> > > immediately. BKME cannot guarantee the integrity of this
> > > communication
> > and
> > > accepts no liability for any damage caused by this email or its
> > attachments
> > > due to viruses, any other defects, interception or unauthorized
> > > modification. The information, views, opinions and comments of
> > > this
> > message
> > > are those of the individual and not necessarily endorsed by BKME."
> > >
> >
> > "This email message and any attachments transmitted with it may
> > contain confidential and proprietary information, intended only for
> > the named recipient(s). If you have received this message in error,
> > or
>
> > if you are not the named recipient(s), please delete this email
> > after notifying the sender immediately. BKME cannot guarantee the
> > integrity of this communication and accepts no liability for any
> > damage caused by this email or its attachments due to viruses, any
> > other defects, interception or unauthorized modification. The
> > information, views, opinions and comments of this message are those
> > of the individual and
> not necessarily endorsed by BKME."
> >
>
> IMPORTANT: E-mail sent through the Internet is not secure. Legg Mason
> therefore recommends that you do not send any confidential or
> sensitive information to us via electronic mail, including social
> security numbers, account numbers, or personal identification numbers.
> Delivery, and or timely delivery of Internet mail is not guaranteed.
> Legg Mason therefore recommends that you do not send time sensitive or
> action-oriented messages to us via electronic mail.
>
> This message is intended for the addressee only and may contain
> privileged or confidential information. Unless you are the intended
> recipient, you may not use, copy or disclose to anyone any information
> contained in this message. If you have received this message in error,
> please notify the author by replying to this message and then kindly
> delete the message. Thank you.
>
IMPORTANT: E-mail sent through the Internet is not secure. Legg Mason
therefore recommends that you do not send any confidential or sensitive
information to us via electronic mail, including social security numbers,
account numbers, or personal identification numbers. Delivery, and or timely
delivery of Internet mail is not guaranteed. Legg Mason therefore recommends
that you do not send time sensitive
or action-oriented messages to us via electronic mail.
This message is intended for the addressee only and may contain privileged or
confidential information. Unless you are the intended recipient, you may not
use, copy or disclose to anyone any information contained in this message. If
you have received this message in error, please notify the author by replying
to this message and then kindly delete the message. Thank you.
|
