Re: [ADSM-L] SV: Library unavailable
2009-07-07 11:37:09
Hi,
I am using the command line. As for the serial number, I´ll remove the defined
library and redefine it without using this clause, and then create the
path...and see what happens.
I´ve already removed TSM and reinstalled it.
The IBMtaped daemon is up and running. IBMtaped version is 1.5.3 and I ran the
IBMtapeutil facility to check the Media Changer and Drives and everything seems
to be ok, at least at OS level.
Mario
________________________________
From: Christian Svensson <Christian.Svensson AT CRISTIE DOT SE>
To: ADSM-L AT VM.MARIST DOT EDU
Sent: Tuesday, July 7, 2009 2:48:34 AM
Subject: SV: Library unavailable
Hi,
I normally don't use the ISC or WebGUI to define any drives or libraries.
But you need to define the path between.
Another thing I see is that the Serial number that you specify on both strings
is different.
Try to use the command line instead of the GUI,
>define libr LIBLT01 libtype=SCSI
>define path TSMSERVER liblt01 srct=server destt=libr device=/dev/XXXXX
>define dr liblt0 DRIVE0
>define path TSMSERVER drive0 srct=server destt=dr libr=liblt01 device=/dev/XXXX
>define dr liblt0 DRIVE1
>define path TSMSERVER drive1 srct=server destt=dr libr=liblt01 device=/dev/XXXX
>define dr liblt0 DRIVE2
>define path TSMSERVER drive2 srct=server destt=dr libr=liblt01 device=/dev/XXXX
If it still don't work. Make a search in the message file for your drives or
look in /proc for more information.
You maybe also need to upgrade your drivers for your IBM drives.
Best Regards
Christian Svensson
Cell: +46-70-325 1577
E-mail: Christian.Svensson AT cristie DOT se
Skype: cristie.christian.svensson
________________________________________
Från: ADSM: Dist Stor Manager [ADSM-L AT VM.MARIST DOT EDU] för Mario Behring
[mariobehring AT YAHOO DOT COM]
Skickat: den 7 juli 2009 07:04
Till: ADSM-L AT VM.MARIST DOT EDU
Ämne: Library unavailable
Hi list,
When trying to define drives I get the following message:
DEFINE DRIVE LIBLTO1 LIB1DRIVE0 ELEMENT=256 ONLINE=Yes WWN="500308FF421B4001"
SERIAL="1110165508"
ANR2017I Administrator SERVER_CONSOLE issued command: DEFINE DRIVE LIBLTO1
LIB1DRIVE0 ELEMENT=256 ONLINE=Yes
WWN=500308FF421B4001 SERIAL=1110165508
ANR8444E DEFINE DRIVE: Library LIBLTO1 is currently unavailable.
The library is defined...
DEFINE LIBRARY LIBLTO1 LIBTYPE=SCSI SERIAL="0000013203721000" SHARED=NO
ANR2017I Administrator SERVER_CONSOLE issued command: DEFINE LIBRARY LIBLTO1
LIBTYPE=SCSI SERIAL=0000013203721000
SHARED=NO
ANR8400I Library LIBLTO1 defined.
The library is an IBM ULT3583-TL with 3 drives. TSM is 5.2.2.2 running on Linux
SuSE. I cannot upgrade it due to license issues...not at this time anyway.
TSM Server was running fine until a week ago when it stopped at some
point...not clear to me. I removed it completely and I am trying to install it
again, but it keeps telling me the library is unavailable. The TSM Device
Driver was installed, but I believe it was not being used because it does not
support the current Linux Kernel version.
tsmlinux:/opt/tivoli/tsm/devices/bin # ./tsmscsi
TSM device driver not available for kernel release 2.4.21-241-smp
Any help is appreciated.
Mario
|
|
|