What are the other two TSM instances doing?  I'm assuming they share the
Library and drives right?
It could be that this TSM instance is just waiting for access to the
drives.

Also what state were some of the sessions in?  Like "media wait"
"running" etc.

I usually see this behavior when something is waiting for the library
and it's taking its time.

See Ya'
Howard


> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of ashish sharma
> Sent: Wednesday, February 11, 2009 10:23 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] cannot run command
> 
> Hello Howard,
> 
> There are a total of 37 sessions running,some are user sessions and
> some are
> of library clients.this box is running two other tsm server instances
.
> 
> q path again hangs while q drive is perfect.
> 
> 
> On 2/11/09, Howard Coles <Howard.Coles AT ardenthealth DOT com> wrote:
> >
> > What other sessions are running when you issue the command?  I've
> known
> > some processes kind of hold the storage in what seems like limbo for
> a
> > while.
> >
> > Does this box do anything else besides TSM?
> >
> > Oh, and q path and q drive to see where they stand.
> >
> > See Ya'
> > Howard
> >
> >
> > > -----Original Message-----
> > > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
> Behalf
> > > Of ashish sharma
> > > Sent: Wednesday, February 11, 2009 10:02 AM
> > > To: ADSM-L AT VM.MARIST DOT EDU
> > > Subject: Re: [ADSM-L] cannot run command
> > >
> > > Hello,
> > >
> > > The o/p of command is as below:
> > >
> > >
> > > # /usr/sbin/lsdev  -C  -c tape  -H
> > > name  status    location     description
> > >
> > > rmt0  Available 1Z-08-00-0,0 Differential SCSI 4mm Tape Drive
> > > rmt1  Available 31-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > > smc0  Available 31-08-01     IBM 3584 Library Medium Changer (FCP)
> > > rmt2  Available 31-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > > rmt3  Available 2U-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > > rmt6  Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > > rmt4  Available 2U-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > > rmt5  Available 2U-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > > rmt7  Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > > smc1  Available 2d-08-01     IBM 3584 Library Medium Changer (FCP)
> > > rmt8  Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > > rmt9  Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > > rmt10 Available 2d-08-01     IBM 3580 Ultrium Tape Drive (FCP)
> > >
> > >
> > >
> > >
> > >
> > > while o/p of "q proc" does not show anything.
> > >
> > >
> > >
> > > Regards
> > >
> > > Ashish
> > >
> > >
> > >
> > > On 2/11/09, Kamran Rao <kamran.rao AT grhosp.on DOT ca> wrote:
> > > >
> > > > As root - run "lsdev -Cc tape" and see if your drives and medium
> > > changer
> > > > are showing up as "available" - if shows up as "defined" then
you
> > > might
> > > > have a device problem. You have not mentioned what kind of
> library
> > > and
> > > > also if it is a direct connect as "scsi" or via FC adapter etc
> etc?
> > > >
> > > >
> > > > Regards,
> > > >
> > > > Kamran Rao
> > > >
> > > > -----Original Message-----
> > > > From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On
> > Behalf
> > > Of
> > > > ashish sharma
> > > > Sent: February 11, 2009 10:08 AM
> > > > To: ADSM-L AT VM.MARIST DOT EDU
> > > > Subject: [ADSM-L] cannot run command
> > > >
> > > > Hello all,
> > > >
> > > > My TSM server version is
> > > >
> > > > Storage Management Server for AIX-RS/6000 - Version 5, Release
3,
> > > Level
> > > > 5.0 on AIX.
> > > >
> > > > The issue i am facing is that when i try to give command  like
"q
> > > path"
> > > > or "q mount" the command hangs as shown below
> > > >
> > > > *************************
> > > > tsm: TSMLM>q mount
> > > >
> > > > *************************
> > > >
> > > > and does not give any o/p but when i give command like q
session,
> it
> > > > works but again i am unable to cancel any session.Does anybody
> has
> > > any
> > > > idea why is it happening?I think restaring the server might
solve
> > the
> > > > problem but at present i am not in favour of it.
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Best Regards
> > > > Ashish Sharma
> > > > ST Microelectronics Ltd.
> > > > 919717003853
> > > >
> > >
> > >
> > >
> > > --
> > > Best Regards
> > > Ashish Sharma
> > > ST Microelectronics Ltd.
> > > 919717003853
> >
> 
> 
> 
> --
> Best Regards
> Ashish Sharma
> ST Microelectronics Ltd.
> 919717003853