Re: [ADSM-L] IBM TS3310 Checkin/Checkout Tape Operational Question
2008-11-05 17:02:31
Does ALMS apply to the TS3310? Do you have virtual I/O enabled?
Does 3576lib and its control path drive really correspond to cgoatl03?
[RC]
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Lamb, Charles P.
Sent: Wednesday, November 05, 2008 7:44 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] IBM TS3310 Checkin/Checkout Tape Operational Question
Hi.........
We have just installed a brand new TS3310 ==> IBM 3576-L5B ATL. Atape
version is 11.2.7.0 and ATL version is 500GS002 which appears to be
current. TSM version is 5.4.3.2 and IBM 7026-H70 AIX V5.3.8.3. We have
an IBM 3584-L32/D32 ATL which works differently concerning the
checkin/checkout tapes via I/O slots. Does the TS3310 I/O slots work
differently as oppose to the IBM 3584-L32/D32 ATL I/O slots. See below
for the TS3310 operational tasks.
We have run tapeutil -f /dev/smc0 inventory which shows robot, I/O
slots, drives and library slots.
Step one of this morning.....
1) Placed tapes into I/O slots
2) IBM 3576 screen asked where the tapes should go system or
cgoatl03 - hit cgoatl03 button and OK button
3) Ran label libv 3576lib checkin=scr overwrite=yes search=bulk
labelsource=barcode
4) We found in activity log anr8386w messages -- slot xx of library
3576lib is inaccessible, slot xx are the I/O slots
Step two this morning.....
1) Placed tapes into I/O slots
2) IBM 3576 screen asked where the tapes should go system or
cgoatl03 - hit cgoatl03 button and OK button
3) We went into IBM 3576 web GUI and manually moved the tapes from
I/O slots to IBM 3576 library open slots
4) Ran label libv 3576lib checkin=scr overwrite=yes search=bulk
labelsource=barcode
5) Ran q libv and showed the tapes as scratch tapes
Why do we need step #3 above?? Is this normal??
DISCLAIMER:
This message is intended for the sole use of the addressee, and may contain
information that is privileged, confidential and exempt from disclosure under
applicable law. If you are not the addressee you are hereby notified that you
may not use, copy, disclose, or distribute to anyone the message or any
information contained in the message. If you have received this message in
error, please immediately advise the sender by reply email and delete this
message.
|
|
|