ADSM-L

Re: [ADSM-L] Library manager/library conundrum

2008-10-02 12:42:46
Subject: Re: [ADSM-L] Library manager/library conundrum
From: "Abbott, Joseph" <JABBOTT AT PARTNERS DOT ORG>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 2 Oct 2008 12:40:32 -0400
Correct and there shouldn't be any paths on the client systems. Only the library
manager needs the paths.
You need to setup paths from the library manager to itself and then to the other
library clients.
We are using this setup with 19 TSM instances accessing a TS3500 library and two
library managers.

JoeA

Joseph A Abbott MCSE/MCSD
Partners Healthcare Systems Development Team
Tivoli Storage Manager
jabbott AT partners DOT org 
Cell-617-633-8471
Desk-617-724-4929
Page-# (617) 362-6341
jabbot1 AT usamobility DOT net 

"What fits your schedule better, exercising one hour a day or being dead 24
hours a day."


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Mark
Stapleton
Sent: Thursday, October 02, 2008 12:33 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] Library manager/library conundrum

From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Paul Zarnowski
>Double check your element numbers and paths to the drives.  Make sure
you
>have a path defined for each drive to each library-client server.

There are no drive definitions for the "remote" library in the library
client, and therefore no element numbers or paths to check. There is a
path in the library manager that connects each of the tape drives to the
library client, and as I mentioned there is obviously some communication
going on.

Here's another question that has been asked...

When a library client sends migrated data from disk to a tape drive
managed by a library manager, does the data flow on fiber from the
client to the tape drive directly, or does it flow across the LAN from
the client to the manager, and then on fiber from the manager to the
tape drive?
 
--
Mark Stapleton (mark.stapleton AT cdw DOT com)
CDW Berbee
System engineer
7145 Boone Avenue North, Suite 140
Brooklyn Park MN 55428-1511
763-592-5963
www.berbee.com
 

The information transmitted in this electronic communication is intended only
for the person or entity to whom it is addressed and may contain confidential
and/or privileged material. Any review, retransmission, dissemination or other
use of or taking of any action in reliance upon this information by persons or
entities other than the intended recipient is prohibited. If you received this
information in error, please contact the Compliance HelpLine at 800-856-1983 and
properly dispose of this information.