Also make sure the Win2K3 RSM service is stopped and DISABLED.
W
On Fri, Sep 12, 2008 at 3:30 PM, Kelly Lipp <lipp AT storserver DOT com> wrote:
> I don't have any specific knowledge of your set up, but one thing that
> could be happening is a mismatch between the SCSI ID and Element number of
> the drive. I've seen this happen: library mounts a tape in a drive and TSM
> tries to mount the tape in the other drive. Thus, TSM does not see the tape
> that got mounted. In your case this is pretty easy to fix: switch the
> SCSI/Element around and see if that resolves the problem.
>
> Otherwise, I've got no idea!
>
> Kelly Lipp
> CTO
> STORServer, Inc.
> 485-B Elkton Drive
> Colorado Springs, CO 80907
> 719-266-8777
> www.storserver.com
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
> Of
> Bill Bush
> Sent: Friday, September 12, 2008 1:02 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: [ADSM-L] Xseries w/ iSeriestape library
>
> I have a new install of Tivoli 5.5.0. The server is an IBM Blade 8853-L4U
> in an HS21 chassis, running Windows 2003 Standard SP2. The blade uses
> DASD and tape drives within the AS400. We have one 3590 tape drive, and a
> 3577 tape library that includes two 3592-E05 drives. On the Windows
> server, the 3 tape drives show in Hardware Manager with a 6.1.9.3 IBM
> driver . The Changer Bus Enumerator also has a 6.1.9.3 driver, as does
> the Tape Bus Enumerator.
> The problems I am having are getting anything to go on tape,
> whether it is a migration or a backup . When doing a Backup DB or Backup
> stgpool, I mount a scratch tape & answer the mount request w/ REPLY 00x.
> The command is accepted, but the request is still there, until it times
> out or is cancelled. This occurs on all 3 drives. I've tried defining
> tape volumes for the Offsite & Onsite pools, but the results are the same.
>
> More info; if I go into IBM iSeries Integrated Server Support,
> only the 3590 tape drive shows. I believe this is OK, because the other
> 3592 drives are controlled by the Auto-library. Before using the 3590
> drive , I do vary it off on the iSeries partition, & lock it on the
> Windows server.
>
> Any tips , troubleshooting, etc are appreciated.
>
> bill bush
>
>
> The information contained in this communication may be confidential, is
> intended only for the use of the recipient named above, and may be legally
> privileged. If the reader of this message is not the intended recipient,
> you are hereby notified that any dissemination, distribution, or copying of
> this communication, or any of its contents, is strictly prohibited. If you
> have received this communication in error, please re-send this communication
> to the sender and delete the original message and any copy of it from your
> computer system. Thank you.
> For more information please visit: http://www.pdpgroupinc.com
>
|