Re: [ADSM-L] backup via NAT with TSM
2008-08-18 10:52:31
Problem is that in PROMPTED mode every time dsmcad is run it opens
some random high port, and you can never know what it is.
# netstat -tlpn | grep dsmc
tcp 0 0 0.0.0.0:32769 0.0.0.0:*
LISTEN 4024/dsmcad
tcp 0 0 0.0.0.0:1581 0.0.0.0:*
LISTEN 4024/dsmcad
# pkill dsmcad
# dsmcad
# netstat -tlpn | grep dsmc
tcp 0 0 0.0.0.0:37376 0.0.0.0:*
LISTEN 14716/dsmcad
tcp 0 0 0.0.0.0:1581 0.0.0.0:*
LISTEN 14716/dsmcad
that means that firewall admin needs to open up a whole range of high
TCP ports between particular client and the server which is not very
good security wise and plain ugly.
If client sits behind NAT, using POLLING mode is the only way to go IMHO.
2008/8/18 Howard Coles <Howard.Coles AT ardenthealth DOT com>:
Your Firewall/NAT admin(s) should be able to tell you which ports
they see communications attempted.
>
--
Warm regards,
Michael Green
|
|
|