ADSM-L

Re: [ADSM-L] Gresham/acsls/tsm

2008-08-17 12:55:58
Subject: Re: [ADSM-L] Gresham/acsls/tsm
From: Ibán Bernaldo de Quirós Márquez <ibanmdti AT YAHOO DOT ES>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Sun, 17 Aug 2008 16:55:04 +0000
Kurt is wrong...

When you are using EDT, there are some TSM commands that do not work with an 
external library, that the case with, checkin, checkout, and label commands for 
example.

In your case TSM will not know anything about scratch tapes.

The only thing that you have to do is to assign those scratch tapes in the 
corresponding ACSLS pool.

When TSM needs a tape, it will demand to EDT a tape, then  EDT, will do 
automatically the labelling of the tape, and then share the label with TSM. 
Then this volume will be a part of the stgpool that is needing the volume.

EDT will also run the set scratch command on ACSLS, and set the flag to data or 
scratch when is needed.

In a EDT environment, TSM do not know anything about the scratch tapes. TSM 
will ony knows about private tapes -> the tape it owns. EDT will do the rest.

Hope this helps.

Regards,
Ibán.-





----- Mensaje original ----
De: BEYERS Kurt <Kurt.BEYERS AT VRT DOT BE>
Para: ADSM-L AT VM.MARIST DOT EDU
Enviado: sábado, 16 de agosto, 2008 17:38:24
Asunto: Re: [ADSM-L] Gresham/acsls/tsm

Hi,

The scratch tapes are now in the ACSLS database inventory, but TSM does
not synchronize the library inventory in it's own database with the
ACSLS inventory automatically.

Just run the command:

'checkin libv LIBRARY_NAME search=yes status=scratch checkl=no'

to add the new scratch tapes to the TSM library inventory.

Best regards,
Kurt

Ps. I'm not using Gresham software, but I don't think it changes
anything to the scenario.

> -----Oorspronkelijk bericht-----
> Van: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Namens
Killam,
> Perpetua
> Verzonden: vrijdag 15 augustus 2008 16:30
> Aan: ADSM-L AT VM.MARIST DOT EDU
> Onderwerp: [ADSM-L] Gresham/acsls/tsm
> 
> Anyone familiar with tsm/gresham and acsls?
> 
> I checked in some scratch tapes via acsls
> 
> Set scratch
> Pool #
> Range #
> 
> However,
> 
> Tsm is not recognizing the newly checked in tapes, any ideas?
> 
> 
*** Disclaimer ***

Vlaamse Radio- en Televisieomroep
Auguste Reyerslaan 52, 1043 Brussel

nv van publiek recht
BTW BE 0244.142.664
RPR Brussel
http://www.vrt.be/disclaimer


__________________________________________________
Correo Yahoo!
Espacio para todos tus mensajes, antivirus y antispam ¡gratis! 
Regístrate ya - http://correo.yahoo.es

<Prev in Thread] Current Thread [Next in Thread>