Re: [ADSM-L] FW: Slow Transfer Speeds After 2003 SP2 upgrade

I passed the MS KB reference to the Windows Sysadmin. In our case,
updating the network card drivers was sufficient to resolve the problem.

YMMV

[RC]
 

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Kelly Lipp
Sent: Friday, July 11, 2008 9:38 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] FW: Slow Transfer Speeds After 2003 SP2 upgrade

Folks,

 

Several weeks ago, somebody was seeing something very similar to our
experience below.  I didn't see if the problem was resolved, but here is
a fix if it wasn't.

 

Thanks,

 

Kelly Lipp

CTO

STORServer, Inc.

485-B Elkton Drive

Colorado Springs, CO 80907

719-266-8777

www.storserver.com

 

From: Ron Pavan
Sent: Thursday, July 10, 2008 10:28 AM
To: Bill Smoldt; Dean VanderDoes; Diane Sullivan; Glenn Brennan; James
Amend; John Stephens; Kelly Lipp; Mike Swartz; mod; Ron James; Ron Pavan
Subject: Slow Transfer Speeds After 2003 SP2 upgrade

 

Some of you might have seen this already but I know I had not.  Here is
a link to a MS article that explains the fix/workaround for poor network
performance on a server after SP2 was installed.  I worked with Argonne
on an exchange backup problem where performance was 2 Mb/sec from the
exchange server.  I was able to track this back to starting on May 29th
(the same day they did and SP2 upgrade).  They implemented this KB
article on the Exchange server and the transfer speeds are now back up
between the 50-70 Mb/sec range.

 

Just thought I would share it in case you run into something like that.

 

http://support.microsoft.com/kb/936594

 


DISCLAIMER:
This message is intended for the sole use of the addressee, and may contain 
information that is privileged, confidential and exempt from disclosure under 
applicable law. If you are not the addressee you are hereby notified that you 
may not use, copy, disclose, or distribute to anyone the message or any 
information contained in the message. If you have received this message in 
error, please immediately advise the sender by reply email and delete this 
message.