Re: [ADSM-L] Problem is still there with a LTO volume
2008-04-03 16:18:45
If your storage pool: TPCE_BCK_DATA_COPY has "Delay Period for Volume
Reuse:" set to a value greater than zero (say 2 days), you will have to
wait for 2 days until that volume is deleted by TSM, as per your
request.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Jacquelin Bouchard
Sent: Thursday, April 03, 2008 2:23 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: [ADSM-L] Problem is still there with a LTO volume
1) q vol a00043 f=d
Output:
Volume Name : A00043
Storage Pool Name : TPCE_BCK_DATA_COPY
Device Class Name : LTO2
Estimated Capacity : 381 468
Scaled Capacity Applied :
Pct Util : 0,2
Volume Status : Filling
Access : Offsite
Pct. Reclaimable Space : 100
Scratch Volume? : Yes
In Error State? : No
Number of Writable Sides : 1
Number of Times Mounted : 4
Write Pass Number : 1
Approx. Date Last Written : 07-06-12 09:48:25 EDT
Approx. Date Last Read : 07-06-11 15:53:01 EDT
Date Became Pending :
Number of Write Errors : 0
Number of Read Errors : 0
Volume Location : vault
Volume is MVS Lanfree Capable : No
Last Update by (administrator) : ADMIN
Last Update Date/Time : 07-06-12 13:15:32 EDT
Begin Reclaim Period :
End Reclaim Period :
Drive Encryption Key Manager :
2) q content a00043 f=d
Output:
Date/Time : 08-04-03 14:03:09 EDT
Message : ANR2017I Administrator ADMIN issued command: QUERY
CONTENT a00043 f=d (SESSION: 213681)
Date/Time : 08-04-03 14:03:09 EDT
Message : ANR2034E QUERY CONTENT: No match found using this
criteria. (SESSION: 213681)
3) delete volume a00043
Output:
Date/Time : 08-04-03 13:57:50 EDT
Message : ANR2017I Administrator ADMIN issued command: DELETE
VOLUME a00043 (SESSION: 213681)
Date/Time : 08-04-03 13:57:50 EDT
Message : ANR2406E DELETE VOLUME: Volume A00043 still contains
data. (SESSION: 213681)
4) move data a00043
Output:
Date/Time : 08-04-03 15:20:57 EDT
Message : ANR2017I Administrator ADMIN issued command: MOVE DATA
a00043 (SESSION: 214470)
Date/Time : 08-04-03 15:20:57 EDT
Message : ANR2209W Volume A00043 contains no data. (SESSION: 214470)
5) delete volume a00043 discard=yes
Output:
Date/Time : 08-04-03 14:00:08 EDT
Message : ANR2017I Administrator ADMIN issued command: DELETE
VOLUME a00043 discard=yes (SESSION: 213681)
Date/Time : 08-04-03 14:00:08 EDT
Message : ANR1423W Scratch volume A00043 is empty but will not be
deleted - volume access mode is "offsite". (SESSION: 213681)
How can i delete a volume with access mode "offsite"?
Thanks,
Jacquelin Bouchard, UQTR
|
<Prev in Thread] |
Current Thread |
[Next in Thread> |
Re: [ADSM-L] Problem is still there with a LTO volume,
Warren Becker <=
|
|
|