I'll have to look -- I *think* they're both on the same tape, LTO-4. We've only 
got one LTO-4 in the library showing errors, and it's in a different storage 
pool.

I'm still bothered by the fact that the TSM server goes into 'sendw' and shows 
300 to 500 Bytes per second transfer rate to the Win2003 system -- which is 
showing 99% CPU usage in System Idle Processes (and I'd love to kill the 
MickeySoft idiot who decided to report network overhead as 'system idle').

Tom

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Wanda Prather
Sent: Tuesday, March 11, 2008 4:12 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: AW: Interesting problem in MS-Win restoer -- anyone seen something 
like this before?

Hey Tom,

THAT is an interesting bit of information.
What media is that 38GB file on?  Do you know the volser?
If I were going to work on it, the first thing I would do is copy that tape
to a different tape and then try the restore again.

W


On 3/11/08, Kauffman, Tom <KauffmanT AT nibco DOT com> wrote:
>
> We managed to restore a 206 GB file to the same server with no issues or
> errors; the admin of the box determined we didn't need the 38 GB file, so
> the issue was dropped. I'd rather have resolved the issue, myself.
> Tom Kauffman
> NIBCO, Inc
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf 
> Of
> Henrik Vahlstedt
> Sent: Tuesday, March 11, 2008 3:05 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: AW: Interesting problem in MS-Win restoer -- anyone seen
> something like this before?
>
> Hello,
>
> Only curious, is this one solved?
>
>
> //Henrik
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf 
> Of
> Stefan Holzwarth
> Sent: 10. mars 2008 20:33
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: [ADSM-L] AW: Interesting problem in MS-Win restoer -- anyone seen
> something like this before?
>
> In the past we had 2 times a similar problem:
> first time (tsm server on mvs) the ip sequence number did a wrap around
> and was not properly handled by mvs. (So large restores always stopped at
> different positions) sencond time (tsm server on nt) we realized that our
> network backbone did corrupt our ip pakets without crc errors! we could view
> the problem by adding crc tothe communication layer within tsm. The restore
> to that time (a exchange db) was no more possible since the backup data were
> not correct. The restore always stopped at the same position.
>
> Regards
> Stefan Holzwarth
>
> > -----Ursprüngliche Nachricht-----
> > Von: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Im Auftrag
> > von Kauffman, Tom
> > Gesendet: Montag, 10. März 2008 15:05
> > An: ADSM-L AT VM.MARIST DOT EDU
> > Betreff: Interesting problem in MS-Win restoer -- anyone seen
> > something like this before?
> >
> > We've been trying to restore a 38 GB file to a Win2003 SP1 server; the
> > restore comes to a near halt at 31.8 GB.
> >
> > At the TSM server side (5.5.0.0) we see 'sendw', and if we leave
> > everything alone the restore continues at an incredibly slow pace (20
> > MB in 8 hours).
> >
> > On the client side - CPU utilization drops to between 1 and 3 percent,
> > but task manager shows 'system idle process' using 99% of the cpu.
> >
> > The results have been the same with both the TSM 5.1.6 client and the
> > 5.5 client, using both the GUI and the command line.
> >
> > The only errors that show up on either system occur when we kill the
> > restore.
> >
> > And (FWIW) there is no anti-virus scanner running while the restore is
> > running.
> >
> > I'm lost - any ideas/suggestions?
> >
> > TIA
> >
> > Tom Kauffman
> > NIBCO, Inc
> >
> > ________________________________
> > CONFIDENTIALITY NOTICE: This email and any attachments are for the
> > exclusive and confidential use of the intended recipient. If you are
> > not the intended recipient, please do not read, distribute or take
> > action in reliance upon this message. If you have received this in
> > error, please notify us immediately by return email and promptly
> > delete this message and its attachments from your computer system. We
> > do not waive attorney-client or work product privilege by the
> > transmission of this message.
> >
>
>
> -------------------------------------------------------------------
> The information contained in this message may be CONFIDENTIAL and is
> intended for the addressee only. Any unauthorised use, dissemination of
> the
> information or copying of this message is prohibited. If you are not the
> addressee, please notify the sender immediately by return e-mail and
> delete
> this message.
> Thank you.
>
> CONFIDENTIALITY NOTICE:  This email and any attachments are for the
> exclusive and confidential use of the intended recipient.  If you are not
> the intended recipient, please do not read, distribute or take action in
> reliance upon this message. If you have received this in error, please
> notify us immediately by return email and promptly delete this message
> and its attachments from your computer system. We do not waive
> attorney-client or work product privilege by the transmission of this
> message.
>

CONFIDENTIALITY NOTICE:  This email and any attachments are for the
exclusive and confidential use of the intended recipient.  If you are not
the intended recipient, please do not read, distribute or take action in
reliance upon this message. If you have received this in error, please
notify us immediately by return email and promptly delete this message
and its attachments from your computer system. We do not waive
attorney-client or work product privilege by the transmission of this
message.