hi, did you tried using mt0 instead of rmt0?

On Dec 17, 2007 1:27 PM, hshahizul <hshahizul AT gmail DOT com> wrote:

> Some one pleases help. I'm stuck more then a week for this error.
>
>
>
> TSM Server 5.4.0.0
>
> AIX 5.3
>
> Tape Library TS3100 (single drive)
>
> Atape Driver 9.7.5.0
>
>
>
> dev type : LTO
>
> devc format : ultrium3c
>
> Drive Ultrium3
>
>
>
> # lsdev -Cc tape
>
> rmt0 Available 07-08-00-4,0 IBM 3580 Ultrium Tape Drive
>
> smc0 Available 07-08-00-4,1 IBM 3573 Tape Medium Changer
>
>
>
>
>
> # lscfg -vl rmt0
>
>  rmt0             U787B.001.DNWG37G-P1-C5-T1-L4-L0  IBM 3580 Ultrium Tape
> Drive
>
>
>
>        Manufacturer................IBM
>
>        Machine Type and Model......ULT3580-TD3
>
>        Serial Number...............1210283884
>
>        Device Specific.(FW)........73P5
>
>
>
> # lscfg -vl smc0
>
>  smc0  U787B.001.DNWG37G-P1-C5-T1-L4-L1  IBM 3573 Tape Medium Changer
>
>
>
>        Manufacturer................IBM
>
>        Machine Type and Model......3573-TL
>
>        Serial Number...............00L2U78C2421_LL0
>
>        Device Specific.(FW)........3.70
>
>
>
>
>
>
>
> I have tried to migrate from diskpool to tapepool but failed with error
>
> ANR8311E An I/O error occurred while accessing drive
>
> DRIVE1 (/dev/rmt0) for WRITE operation, errno = 5.
>
>
>
> I tried to write via tar command [ tar -cvf /dev/rmt0 /tmp ]. It
> successfull
> write to tape
>
>
>
> I tried to used tapeutil facility (halt TSM Server)
>
>
>
>
>
> Without lto3 tape inside tape drive : option 37 (write)
>
> .....
>
> Writing file to tape...
>
> Write terminated, 0 total bytes written...
>
> Operation failed with errno 46: Device not ready
>
> Residual count: 4125543
>
> Error Sense Data,  Length 96
>
>
>
> With lto3 tape mount inside tape drive : option 37 (write)
>
> ......
>
> Writing file to tape...
>
> Write terminated, 0 total bytes written...
>
> Operation failed with errno 5: I/O error
>
> Residual count: 4125543
>
>
>
>
>
> I have tried to install TSM 5.5 and Atape 10.3.7.0 but the result  is
> still
> the same.
>
> I also tried to update devclass class=drive , but still the same output.
>
>
>
> The question here, why via tar command , tape can be written but cannot
> via
> TSM
>
>
>
> Tq.
>
>
>
>
>
>
>
> Additional Info
>
> One more things, while the process of migration take place AIX error
> report
> produce as below:
>
>
>
> ========================================
>
> LABEL:          TAPE_ERR4
>
> IDENTIFIER:     5537AC5F
>
>
>
> Date/Time:       Mon Dec 17 22:06:25 WAUST 2007
>
> Sequence Number: 2782
>
> Machine Id:      000535C7D600
>
> Node Id:         db3
>
> Class:           H
>
> Type:            PERM
>
> Resource Name:   rmt0
>
> Resource Class:  tape
>
> Resource Type:   3580
>
> Location:        U787B.001.DNWG37G-P1-C5-T1-L4-L0
>
> VPD:
>
>        Manufacturer................IBM
>
>        Machine Type and Model......ULT3580-TD3
>
>        Serial Number...............1210283884
>
>        Device Specific.(FW)........73P5
>
>
>
> Description
>
> TAPE DRIVE FAILURE
>
>
>
> Probable Causes
>
> ADAPTER
>
> TAPE DRIVE
>
>
>
> Failure Causes
>
> ADAPTER
>
> TAPE DRIVE
>
>
>
>            Recommended Actions
>
>            PERFORM PROBLEM DETERMINATION PROCEDURES
>
>
>
> Detail Data
>
> SENSE DATA
>
> 0604 0000 0A00 0400 0000 0000 0000 0000 0200 0200 0000 0000 0000 0000 0000
> 0000
>
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
>
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
>
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
>
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
>
>
> ---------------------------------------------------------------------------
>
> LABEL:          SCSI_ERR10
>
> IDENTIFIER:     0BA49C99
>
>
>
> Date/Time:       Mon Dec 17 22:06:25 WAUST 2007
>
> Sequence Number: 2781
>
> Machine Id:      000535C7D600
>
> Node Id:         db3
>
> Class:           H
>
> Type:            TEMP
>
> Resource Name:   scsi2
>
> Resource Class:  driver
>
> Resource Type:   sisscsi
>
> Location:        U787B.001.DNWG37G-P1-C5-T1
>
> VPD:
>
>        ROM Level.(alterable).......05080092
>
>        Product Specific.(CC).......5702
>
>
>
> Description
>
> SCSI BUS ERROR
>
>
>
> Probable Causes
>
> CABLE
>
> CABLE TERMINATOR
>
> DEVICE
>
> ADAPTER
>
>
>
> Failure Causes
>
> CABLE LOOSE OR DEFECTIVE
>
> DEVICE
>
> ADAPTER
>
>
>
>            Recommended Actions
>
>            PERFORM PROBLEM DETERMINATION PROCEDURES
>
>            CHECK CABLE AND ITS CONNECTIONS
>
>
>
> Detail Data
>
> SENSE DATA
>
> 0000 FFFF 1900 00F0 0629 0000 0301 0000 0508 0092 0000 00FF 5702 0000 0000
> 0000
>
> E210 0080 FF00 0000 0310 0010 0D5A 89F9 0000 0000 0000 03E8 0629 0000 0000
> FFFF
>
> FFFF FFFF 1025 3380 0000 0000 28E2 0300 0000 0003 8300 0000 8000 0000 8000
> 0000
>
> .....
>
>
>
>
> ---------------------------------------------------------------------------
>
> LABEL:          TAPE_ERR4
>
> IDENTIFIER:     5537AC5F
>
>
>
> Date/Time:       Mon Dec 17 22:05:42 WAUST 2007
>
> Sequence Number: 2780
>
> Machine Id:      000535C7D600
>
> Node Id:         db3
>
> Class:           H
>
> Type:            PERM
>
> Resource Name:   rmt0
>
> Resource Class:  tape
>
> Resource Type:   3580
>
> Location:        U787B.001.DNWG37G-P1-C5-T1-L4-L0
>
> VPD:
>
>        Manufacturer................IBM
>
>        Machine Type and Model......ULT3580-TD3
>
>        Serial Number...............1210283884
>
>        Device Specific.(FW)........73P5
>
>
>
> Description
>
> TAPE DRIVE FAILURE
>
>
>
> Probable Causes
>
> ADAPTER
>
> TAPE DRIVE
>
>
>
> Failure Causes
>
> ADAPTER
>
> TAPE DRIVE
>
>
>
>            Recommended Actions
>
>            PERFORM PROBLEM DETERMINATION PROCEDURES
>
>
>
> Detail Data
>
> SENSE DATA
>
> 0604 0000 0A00 0400 0000 0000 0000 0000 0200 0200 0000 0000 0000 0000 0000
> 0000
>
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
>
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
>
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
> 0000
>
> 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
>
>
> ---------------------------------------------------------------------------
>
> LABEL:          SCSI_ERR10
>
> IDENTIFIER:     0BA49C99
>
>
>
> Date/Time:       Mon Dec 17 22:05:42 WAUST 2007
>
> Sequence Number: 2779
>
> Machine Id:      000535C7D600
>
> Node Id:         db3
>
> Class:           H
>
> Type:            TEMP
>
> Resource Name:   scsi2
>
> Resource Class:  driver
>
> Resource Type:   sisscsi
>
> Location:        U787B.001.DNWG37G-P1-C5-T1
>
> VPD:
>
>        ROM Level.(alterable).......05080092
>
>        Product Specific.(CC).......5702
>
>
>
> Description
>
> SCSI BUS ERROR
>
>
>
> Probable Causes
>
> CABLE
>
> CABLE TERMINATOR
>
> DEVICE
>
> ADAPTER
>
>
>
> Failure Causes
>
> CABLE LOOSE OR DEFECTIVE
>
> DEVICE
>
> ADAPTER
>
>
>
>            Recommended Actions
>
>            PERFORM PROBLEM DETERMINATION PROCEDURES
>
>            CHECK CABLE AND ITS CONNECTIONS
>
>
>
> Detail Data
>
> SENSE DATA
>
> 0000 FFFF 1900 00F0 0629 0000 0301 0000 0508 0092 0000 00FF 5702 0000 0000
> 0000
>
> E210 0080 FF00 0000 0310 000F 0D18 D559 0000 0000 0000 03E8 0629 0000 0000
> FFFF
>
> ....
>
>
>
>
>
> Zul
>



--
Helder Garcia